Configuration template for HT80x firmware version 1.0.57.1
################################################################################ Advanced Settings. ################################################################### Admin password for web interface
# String; between ascii values 33 and 126
# Mandatory
P2=admin
# Disable User Level Web Access. 0 - No, 1 - Yes. Default is 1.
# Number: 0, 1
# Mandatory
P28158 = 1
# Disable Viewer Level Web Access. 0 - No, 1 - Yes. Default is 1.
# Number: 0, 1
# Mandatory
P28159 = 1
# Enable strict password rules. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1
# Mandatory
P28788=0
# Minimum password length. Default is 8.
# Number: 4 - 30.
# Mandatory
P28790=8
# Required number of character classes. Default 3.
# Number: 0 - 4.
# Mandatory
P28791=3
# Allowed Character classes. Default is 7.
# The number is the the sum of the checked number, e.g: 0, 1, 2, 4, 7, 3(1+2), 7(1+2+4), 15(1+2+4+7).
# Number and Checkbox: 1 - Lower case, 2 - Upper case, 4 - Numbers, 8 - Special Characters.
P28792=7
# Layer 2 QoS.
#802.1Q/VLAN Tag (VLAN classification for RTP)
# Number: 0 to 4094
# Mandatory
P51=0
# Layer 2 QoS.
# SIP 802.1p priority value (0 - 7)
# Number: 0 to 7
# Mandatory
P5038=0
# Layer 2 QoS.
# RTP 802.1p priority value (0 - 7)
# Number: 0 to 7
# Mandatory
P5042=0
# Black List for WAN Side Port
# Number: 0 to 65535
P28115 =
# STUN server
# Server address
P76=
# Keep-alive interval (in seconds. default 20 seconds)
# Number: 10 to 160
# Mandatory
P84=20
# Use STUN to detect network connectivity. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P474=0
# Total STUN response misses to restart DHCP (minimum=3 default=3)
# Number: 3 to 15
# Mandatory
P475=3
# Use DNS to detect network connectivity
# Number: 0, 1
# 0 - No, 1 - Yes (default is No)
P1564=0
# Use ARP to detect network connectivity. 0 - NO, 1 - Yes. Default is 1.
# Number: 0, 1
# Mandatory
P8512 = 1
#################################################################################
# Firmware Upgrade #
#################################################################################
# Verify host when using HTTPS
# Number: 0, 1
# 0 - No, 1 - Yes (default is No)
P22030=0
# Firmware Upgrade and Provisioning. 0 - TFTP Upgrade, 1 - HTTP Upgrade, 2 - HTTPS Upgrade, 3 - FTP Upgrade, 4 - FTPS Upgrade.
# Number: 0, 1, 2, 3, 4
# Mandatory
P212=2
# Firmware Server Path
# Server address
P192=fm.grandstream.com/gs
# Config Server Path
# Server address;
P237=fm.grandstream.com/gs
# XML Config File Password
# String; between ascii values 33 and 126
# Mandatory
P1359=
# HTTP/HTTPS User Name
# String; between ascii values 33 and 126
P1360=
# HTTP/HTTPS Password
# String; between ascii values 33 and 126
P1361=
# Firmware File Prefix
# String; between ascii values 33 and 126
P232=
# Firmware File Postfix
# String; between ascii values 33 and 126
P233=
# Config File Prefix
# String; between ascii values 33 and 126
P234=
# Config File Postfix
# String; between ascii values 33 and 126
P235=
# Enable using tags in URL. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1
# Mandatory
P8609=0
# Always send HTTP Basic Authentication Information. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P20713 = 0
# Allow DHCP Option 66 or 160 to override server. 0 - No, 1 - Yes. Default is Yes.
# When set to Yes(1), it will override the configured provision path and method.
# Number: 0, 1
# Mandatory
P145=1
# Additional Override DHCP Option. 0 – None, 1 – Option 150. Default is 0.
# Number:0,1
# Mandatory
P8337=0
# 3CX Auto Provision. 0 - No, 1 - Yes. Default is Yes.
# Number: 0, 1
# Mandatory
P1414=1
# Automatic Upgrade. 0 - No, 1 - Check every () minutes, 2 - Check daily, 3 - Check weekly. Default is No.
# Number: 0, 1, 2, 3
# Mandatory
P22296=0
# Check for new firmware/config file every () minutes, unit is in minute, minimum 60 minutes, default is 7 days.
# Number: 60 to 5256000
# Mandatory
P193=10080
# Automatic Upgrade. Daily at hour(0-23)
# Number: 0 to 23
# Mandatory
P285=1
# Automatic Upgrade End Hour. In 0 to 23 hour range. Default is 22.
# Number: 0 to 23
# Mandatory
P8459=22
# Automatic Upgrade. Weekly on day (0-6)
# Number: 0 to 6
# Mandatory
P286=1
# Randomized Automatic Upgrade. 0 - No, 1 - Yes, default is 0.
# Number: 0, 1
# Mandatory
P8458=0
# 0=Always Check for New Firmware
# 1=Check New Firmware only when F/W pre/suffix changes
# 2=Always Skip the Firmware Check
# Number: 0, 1, 2
# Mandatory
P238=0
# Configuration File Types Allowed. 47 - All, 46 - XML only. Default is 47.
# Number: 46, 47
# Mandatory
P8601= 47
# Download and Process All Available Config File. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1
# Mandatory
P8467=0
# Disable SIP NOTIFY Authentication. 0 - No, 1 - Yes. Default is Yes.
# Number: 0, 1
# Mandatory
P4428=1
#Authenticate Conf File
#Number: 0 No, 1 Yes (cfg file would be authenticated before acceptance if set to Yes)
#Mandatory
P240=0
# Validate Server Certificates. 0 - No, 1 - Yes. Default is 1.
# Number: 0, 1
# Mandatory
P8463 = 0
# Trusted CA Certificates A
# String
P2386 =
# Trusted CA Certificates B
# String
P2486 =
# Load CA Certificates. 0 - Built-in trusted certificates, 1 - Custom trusted certificates, 2 - All trusted certificates
# Number: 0, 1
# Mandatory
P8502 = 0
#SIP TLS Certificate
#String
# Maximum Length: 8192
#P280=
#SIP TLS Private Key
#String
# Maximum Length: 4096
#P279=
#SIP TLS Private Key Password
#String
#Max Length: 64 characters
P281=s1pphone
# Custom Certificate. (Private Key + Certificate)
# String
# Max Length: 8192 characters
P8472 =
# Enable TR-069. 0 - No, 1 - Yes (default is Yes)
# Number: 0, 1
# Mandatory
P1409=1
# ACS URL
#P4503=
# ACS Username
# String
P4504=
# ACS Password
# String
P4505=
# Periodic Inform Enable 0 - No, 1 - Yes (default is No)
# Number: 0, 1
# Mandatory
P4506=0
# Periodic Inform Interval (default is 300)
# Number: 1-99999
P4507=300
# Connection Request Username
# String
P4511=
# Connection Request Password
# String
P4512=
# Connection Request Port. Default is 7547
# Number: 0 - 65535
# Mandatory
P4518 = 7547
# CPE SSL Certificate
P8220=
# CPE SSL Private Key
P8221=
# Enable SNMP. 0 - No, 1 - Yes, default value is 0.
# Number: 0, 1
# Mandatory
P21896=0
# SNMP Version. 1 - Version 1, 2 - Version 2c, 3 - Version 3. Default value is 3.
# Number: 1, 2, 3
# Mandatory
P21904=3
# SNMP Port. Default is port 162
# Number: 162 or 1025 to 65535
# Mandatory
P21903=162
# SNMP Trap IP Address
# Max String Length: 64
P21897=
# SNMP Trap Port. Default value is 162.
# Max String Length: 5.
P21898=162
# SNMP Trap Version. 1 - Version 1, 2 - Version 2c, default is Version 2c.
# Number: 1, 2
# Mandatory
P21899= Version 2c
# SNMP Trap Interval. Default is 5.
# String
P21901=5
# SNMPv1/v2c Community
# Max Character Number: 64
P21902 =
# SNMP Trap Community
# Max String Length: 64
P21900=
# SNMPv3 User Name
# Max Character Number: 64
P21905=
# SNMPv3 Security Level. 0 - noAuthUser, 1 - authUser, 2 - privUser. Default value is 0.
# Number: 0, 1, 2
# Mandatory
P21910=0
# SNMPv3 Authentication Protocol. 0 - None, 1- MD5, 2- SHA. Default value is 0.
# Number: 0, 1, 2
# Mandatory
P21906=0
# SNMP Privacy Protocol. 0 - None, 1 - DES, 2 - AES | AES128. Default value is 0.
# Number: 0, 1, 2
# Mandatory
P21907=0
# SNMPv3 Authentication Key.
P21908=
# SNMPv3 Privacy Key
P21909=
# SNMPv3 Trap User Name
# Max Character Number: 64
P21911=
# SNMPv3 Trap Security Level. 0 - noAuthUser, 1 - authUser, 2 - privUser. Default value is 0.
# Number: 0, 1, 2
# Mandatory
P21916=0
# SNMPv3 Trap Authentication Protocol. 0 - None, 1- MD5, 2- SHA. Default value is 0.
# Number: 0, 1, 2
# Mandatory
P21912=0
# SNMP Trap Privacy Protocol. 0 - None, 1 - DES, 2 - AES | AES128. Default value is 0.
# Number: 0, 1, 2
# Mandatory
P21913=0
# SNMPv3 Trap Authentication Key.
P21914=
# SNMPv3 Trap Privacy Key
P21915=
# Enable RAIUS Web Access Control. 0 - No, 1 - Yes. Default value is 0.
# Number: 0, 1
# Mandatory
P28107=0
# Action up Radius Auth Server Error. 0 - Reject Access, 1 - Authenticate Locally. Default value is 1.
# Number: 0, 1
# Mandatory
P28114=1
# RADIUS Auth Protocol. 0 - PAP, 1 - CHAP, 2 - MsCHAPv1, 3 - MsCHAPv2. Default is 0.
# Number: 0, 1, 2, 3
# Mandatory
P28803=0
# RADIUS Auth Server Address
# ipaddress
P28108=
# RADIUS Auth Server Port
# Max Character Number = 64
P28109=
# RADIUS Shared Secret
# Max Character Number = 64
P28110=
# RADIUS VSA Vendor ID
# Max Character Number: 64
P28111=
# RADIUS VSA Access Level Attribute
# Max Character Number: 64
P28112=
# Enable DDNS. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P28121 = 0
# DDNS Server. 0 - dyndns.org, 1 - freedns.afraid.org, 2 - zoneedit.com, 3 - no-ip.com, 4 - oray.net.
# Number: 0, 1, 2, 3, 4
# Mandatory
P28122 = 0
# DDNS Username
# String
P28123 =
# DDNS Password
# String
P28124 =
# DDNS Hostname
# String
P28125 =
# DDNS Hash
# String
P28126 =
# Enable OpenVPN. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P7050 = 0
# OpenVPN Server Address.
# String
# Maximum Length: 64
P7051 =
# OpenVPN Port.
# String
# Maximum Length: 64
P7052 = 1194
# OpenVPN Interface type. tap - TAP, tun - TUN
# Number: tap, tun
# Mandatory
P20714 = tap
# OpenVPN Transport. udp - UDP, tcp - TCP
# Number: udp, tcp
# Mandatory
P2912 = udp
# Enable OpenVPN LZO Compression. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P20716 = 1
# OpenVPN Encryption.
# String: BF-CBC - BF-CBC 128 bit default key (variable) Default; DES-CBC - DES-CBC 64 bit default key (fixed); RC2-CBC - RC2-CBC 128 bit default key (variable);DES-EDE-CBC - DES-EDE-CBC 128 bit default key (fixed);
# DES-EDE3-CBC - DES-EDE3-CBC 192 bit default key (fixed); DESX-CBC - DESX-CBC 192 bit default key (fixed); RC2-40-CBC - RC2-40-CBC 40 bit default key (variable);CAST5-CBC - CAST5-CBC 128 bit default key (variable);
# RC2-64-CBC - RC2-64-CBC 64 bit default key (variable); AES-128-CBC - AES-128-CBC 128 bit default key (fixed); AES-192-CBC - AES-192-CBC 192 bit default key (fixed);AES-256-CBC - AES-256-CBC 256 bit default key (fixed)
# Mandatory
P20717 = BF-CBC
# OpenVPN Digest.
# String: SHA1 - SHA1 Default; MD5 - MD5; RSA-MD5 - RSA-MD5; RSA-SHA1 - RSA-SHA1; DSA-SHA1-old - DSA-SHA1-old; DSA-SHA1 - DSA-SHA1; RSA-SHA1-2 - RSA-SHA1-2;
# DSA – DSA; RIPEMD160 - RIPEMD160; RSA-RIPEMD160 - RSA-RIPEMD160; MD4 - MD4; RSA-MD4 - RSA-MD4; ecdsa-with-SHA1 - ecdsa-with-SHA1; RSA-SHA256 - RSA-SHA256;
# RSA-SHA384 - RSA-SHA384; RSA-SHA512 - RSA-SHA512; RSA-SHA224 - RSA-SHA224; SHA256 - SHA256; SHA384 - SHA384; SHA512 - SHA512; SHA224 - SHA244; Whirlpool - whirlpool
# Mandatory
P20725 = SHA1
# OpenVPN Username
P8394 =
# OpenVPN Password
P8395 =
# OpenVPN CA
# String
# Maximum Length: 8192
P9902 =
# OpenVPN Certificate
# String
# Maximum Length: 8192
P9903 =
# OpenVPN Client Key
# String
# Maximum Length: 8192
P9904 =
# OpenVPN Client Key Password
# String
# Maximum Length: 64
P20715 =
# OpenVPN Additional Options.
# String
P8460 = 0
# System Ring Cadence
# String
P4040=c=2000/4000;
###############################################
# Call Progress Tones #
###############################################
# Dial Tone
# String
P4000=f1=350@-13,f2=440@-13,c=0/0;
# Ringback Tone
# String
P4001=f1=440@-19,f2=480@-19,c=2000/4000;
# Busy Tone
# String
P4002=f1=480@-24,f2=620@-24,c=500/500;
# Reorder Tone
# String
P4003=f1=480@-24,f2=620@-24,c=250/250;
# Confirmation Tone
# String
P4004=f1=350@-11,f2=440@-11,c=100/100-100/100-100/100;
# Call Waiting tone
# String
P4005=f1=440@-13,c=300/300-300/10000;
# Prompt tone
# String
P4041=
# Prompt Tone Access Code. Maximum 20 digits. No default.
# String
P4042=
# Conference Party Hangup Tone
# String
P28133 = f1=425@-15,c=600/600;
# Special Proceed Indication Tone
# Mandatory
P28196 = f1=350@-13, f2=440@-13, c=750/750-0/0;
# Special Condition Tone. Default is f1=350@-13, f2=450@-13, c=750/750;
# String
# Mandatory
P28211=f1=350@-13, f2=450@-13, c=750/750;
###############################################
# Lock keypad update. 0 - No, 1 - Yes, 2( invisible on web GUI, set to 2 for Reset button - ISP Data reset allowed only). (configuration update via keypad is disabled if set to Yes).
# Number: 0, 1, 2
# Mandatory
P88=0
# Disable voice prompt. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P253=0
# Disable Direct IP Call. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P277=0
# Play Busy Tone When Account is unregistered. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P28181 = 0
# Blacklist For Incoming Calls. Allow users to block incoming calls from specific list of numbers.Maximum allowed SIP numbers: 10, SIP numbers should be separated by a comma (',')
# String: 0-9, *, #, +, comma (','), a-z, A-Z
P28127 =
# NTP Server
# String: Server address
P30=pool.ntp.org
# Secondary NTP Server
# String: Server address
P8333=
# Allow DHCP Option 42 to override NTP server. 0 - No, 1 - Yes. Default is No.
# When set to Yes(1), it will override the configured NTP server.
# Number: 0, 1
# Mandatory
P144=1
# DHCP Option 17 Enterprise Number
# Max Character Number: 5
# Mandatory
P8457=3561
# CDR File Option. 0 - Keep, 1 - Overwrite, 2 - Disabled.
# Number: 0, 1, 2
# Mandatory
P8534=1
# SIP File Option. 0 - Keep, 1 - Overwrite
# Number: 0, 1
# Mandatory
P8535=1
# Disable Week TLS Cipher Suites. 0 – Enable Weak TLS Ciphers Suites, 1 – Disable Symmetric Encryption RC4/DES/3DES, 2 - Disable Symmetric Encryption SEED, 3 - Disable All Of The Above Weak Symmetric Encryption, 4 - Disable Symmetric Authentication MD5, 5 - Disable All Of The Above Weak Symmetric Authentication, 6 - Disable Protocol Version SSLv2/SSLv3, 7 - Disable All Of The Above Weak Protocol Version, 8 - Disable All Of The Above Weak TLS Ciphers Suites
# Number: 0 - 8
# Mandatory
P8536=0
# Minimum TLS Version. 99 - Unlimited, 10 - TLS 1.0, 11 - TLS 1.1, 12 - TLS 1.2
# Number: 99, 10, 11, 12
# Mandatory
P22293=99
# Maximum TLS Version. 99 - Unlimited, 10 - TLS 1.0, 11 - TLS 1.1, 12 - TLS 1.2
# Number: 99, 10, 11, 12
# Mandatory
P22294=99
# Syslog Protocol. 0 – UDP, 1 – SSL/TLS.
# Number: 0, 1
# Mandatory
P8402=0
# Syslog Server (name of the server, max length is 64 characters)
# Server address
P207=
# Syslog Level (Default setting is NONE)
# 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR, 5 - EXTRA DEBUG
# Number: 0, 1, 2, 3, 4, 5
# Mandatory
P208=0
# Send SIP Log. 0 - No, 1 - Yes. (If set to yes, The unit will replicate the received and send SIP packets on the syslog)
# Number: 0, 1
# Mandatory
P1387=0
# Information Capture
# With Secret Key Information.0 - No, 1 - Yes. Default is 0.
# Number: 0,1
# Mandatory
P22419=0
#Automatic Reboot. 0 - No, 1 - Yes, reboot every day, 2 - Yes, reboot every week, 3 - Yes, reboot every month
#Number: 0,1,2,3
#Mandatory
P21929=0
#Hour of the Day(0-23) Defines the hour of the day to reboot the device. Will valid after configured Automatic Reboot to yes.
#Number: 0-23
#Mandatory
P21930=1
#Day of the Week (0-6) Defines the day of the week to reboot the device.
#Number: 0-6
#Mandatory
P21931=1
#Day of the Month (0-30) Defines the day of the month to reboot the device.
#Number: 0-30
#Mandatory
P28118=1
#############################
### E911/HELD Protocol ######
#############################
# Enable E911. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P8565=0
# HELD Protocol. 0 - HTTP, 1 - HTTPS. Default is 0.
# Number: 0, 1
# Mandatory
P8566=0
# HELD Synchronization Interval. Default is 0
# Number: 0, 30 to 1440 (in minutes. 0 (Disable) or Between 30-1440)
# Mandatory
P8567=0
# Location Server
# String Maximum Length: 256
P8568=0
# Location Server Username
# String Maximum Length: 64
P8569=
# Location Server Password
# String Maximum Length: 64
P8570=
# Secondary Location Server
# String Maximum Length: 256
P8571=0
# Secondary Location Server Username
# String Maximum Length: 64
P8572=
# Secondary Location Server Password
# String Maximum Length: 64
P8573=
# HELD Location Types
# String Maximum Length: 64
P8574=geodetic,civic,locationURI
# HELD NAI. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P8576=0
# HELD Identity 1 - 10
# String Maximum Length: 64
P8577=
P8579=
P8581=
P8583=
P8585=
P8587=
P8589=
P8591=
P8593=
P8595=
# HELD Identity 1 - 10 Value
String Maximum Length: 64
P8578=
P8580=
P8582=
P8584=
P8586=
P8588=
P8590=
P8592=
P8594=
P8596=
# E911 Emergency Numbers. Default is 911
# String Maximum Length: 64. 0-9, *, #, ;
P8597=911
# Geolocation-Routing Header. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P8598=0
# Priority Header. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P8599=0
##############################################################################
## FXS PORT 1 Settings ##
##############################################################################
# Account Active. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P271=1
# Primary SIP Server
# Server address
P47=
# Failover SIP Server
# Server address
P967=
# Prefer Primary SIP Server. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P4567=0
# Outbound Proxy
# Server address
P48=
# Backup Outbound Proxy
# Server address
P2333=
# Prefer Primary Outbound Proxy. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P28096=0
# From Domain
# String
P8617=
# Allow DHCP Option 120( override SIP server ) 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P1411=0
# SIP Transport 0 - UDP, 1 - TCP, 2 - TLS
# Number: 0, 1, 2
# Mandatory
P130=0
# SIP URI Scheme When Using TLS. 0 - sip, 1 - sips.
# Number: 0, 1
# Mandatory
P2329=1
# Use Actual Ephemeral Prot in Contact with TCP/TLS. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P2331=0
# NAT Traversal. 0 - No, 1 - STUN, 2 - Keep-Alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0.
# Number: 0, 1, 2, 3, 4, 5
# Mandatory
P52=0
# SIP User ID
# String
P35=
# Authentication ID
# String
P36=
# Authentication password
# String
P34=
# Name (John Doe)
# String
P3=
# DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP.
# Number: 0, 1, 2, 3
# Mandatory
P103=0
# DNS SRV Failover Mode. 0 – Default, 1 – Saved one until TTL, 2 - Saved one until no response
# Number: 0, 1, 2
# Mandatory
P26040=0
# Failback Timer
# Number: 1-64800
# Mandatory
P60056 = 60
# Register Before DNS SRV Failover. 0 – No, 1 – Yes
# Number: 0, 1
# Mandatory
P29095=0
#DNS use Configured IP
# Primary IP
# String
# Maximum Length: 15
P2308=
# Backup IP1
# String
# Maximum Length: 15
P2309=
# Backup IP2
# String
# Maximum Length: 15
P2310=
# Tel URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled
# Number: 0, 1, 2
# Mandatory
P63=0
# SIP Registration. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P31=1
# Unregister On Reboot. 0 - No, 1 - All, 2 - Instance. Default is 0.
# Number: 0,1,2
# Mandatory
P81=0
# Outgoing call without Registration. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P109=1
# Register Expiration (in minutes. default 1 hour, max 45 days)
# Number: 1 to 64800
# Mandatory
P32=60
# Reregister before Expiration (in seconds. Default 0 second)
# Number: 1 to 64800
# Mandatory
P2330=0
# SIP Registration Failure Retry Wait Time, in seconds. Between 1-3600, default is 20
# Number: 1 to 3600
# Mandatory
P138=20
# SIP Registration Failure Retry Wait Time upon 403 Forbidden, in seconds. Between 1-3600, default is 1200, 0 means stop retry registration upon 403 response
# Number: 0 to 3600
# Mandatory
P26002=1200
# Port Voltage Off upon no SIP Registration or SIP Registration Failure. Default is 0.
# Number: 0 - 60. (0 means the port voltage is never turned off)
# Mandatory
P28756=0
# Delay Time of Port Voltage Off Timer Since Boot. Default is 0.
# Number: 0 - 60.
# Mandatory
P28784=0
# Enable SIP OPTIONS Keep Alive. 0 - No, 1 - Yes, default is 0
# Number: 0, 1
# Mandatory
P2397=0
# SIP OPTIONS Keep Alive Interval, in seconds. Between 1-64800, default is 30
# Number: 1 to 64800
# Mandatory
P2398=30
# SIP OPTIONS Keep Alive Max Lost, Number of max lost packets for SIP OPTIONS Keep Alive before re-registration. Between 3-10, default is 3
# Number: 3 to 10
# Mandatory
P2399=3
#Layer 3 QoS
#SIP DSCP (Diff-Serv value in decimal, default 24)
P5046=24
#RTP DSCP (Diff-Serv value in decimal, default 46)
P5050=46
# Local SIP port (default 5060)
# Number: 1 to 65535
# Mandatory
P40=5060
# Local RTP port (1024-65535, default 5004)
# Number: 1024 to 65535
# Mandatory
P39=5004
# Use Random SIP Port. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P20501=0
# Use Random RTP Port. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P20505=0
# Random RTP Port Range: Minimum RTP Port.
# Number: 1024 - 65535.
P60084=
# Random RTP Port Range: Maximum RTP Port
# Number: 1024 - 65535.
P60085=
# Enable RTCP. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P2392=1
# RTP/RTCP Keep Alive On Hold. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P28839 = 0
# Hold Target Before Refer 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P26003=1
# Refer-To Use Target Contact. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P135=0
# Transfer on Conference Hangup. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P4560=0
# Ringing Transfer. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P4820 = 0
# Remove OBP from Route Header. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P4562=0
# Support SIP Instance ID. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P288=1
# Support outbound. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P60081=1
# Support GRUU. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1.
# Mandatory
P60080=0
# Validate Incoming SIP Message . 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P4340=0
# Check SIP UserID for incoming INVITE. 0 - No, 1 - Yes (no direct IP calling if Yes)
# Number: 0, 1
# Mandatory
P258=0
# Authenticate incoming INVITE
# Number: 0, 1
# Mandatory
P2346=0
# Authenticate server certificate domain. 0 - No, 1 - Yes, default is 0
# Number: 0, 1
# Mandatory
P2311=0
# Trusted domain name list.
# (Support setting specific domain names and wildcard domain names, wildcard domain names such as "*.grandstream.com", use "," to separate domain names)
# String: max length 256 characters.
P60082=
# Authenticate server certificate chain. 0 - No, 1 - Yes, default is 0
# Number: 0, 1
# Mandatory
P2367=0
# Allow Incoming SIP Messages from SIP Proxy Only. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P243=0
# Use Privacy Header. 0 - Default, 1 - No, 2 - Yes
# Number: 0, 1, 2
# Mandatory
P2338=0
# Use P-Preferred-Identity Header. 0 - Default, 1 - No, 2 - Yes
# Number: 0, 1, 2
# Mandatory
P2339=0
# Use P-Access-Network-Info Header. 0 - No, 1 - Yes. Default is 1.
# Number: 0, 1
# Mandatory
P26058 = 1
# Use P-Emergency-Info Header. 0 - No, 1 - Yes. Default is 1.
# Number: 0, 1
# Mandatory
P26059 = 1
# Use P-Asserted-Identity Header. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P29098 = 0
# Use P-Early-Media Header. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1
# Mandatory
P60072=0
# SIP REGISTER Contact Header Uses. 0 - LAN address, 1 - WAN address
# Number: 0, 1, 2
# Mandatory
P4437=0
# Caller ID Fetch Order. 0 - Auto, 1 - Disable, 2 - From Header. Defaut is 0.
# Number: 0, 1, 2
# Mandatory
P2324=0
# Allow SIP Factory Reset. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P26015 = 0
# Maximum Number of SIP Request Retries. Default is 2.
# Number: 1-10
# Mandatory
P60055 = 2
# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 50.
# Number: 50, 100, 200, 400, 800
# Mandatory
P209=50
# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses.
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec, 1600 - 16 sec, 3200 - 32 sec. Default 400.
# Number: 200, 400, 800, 1600, 3200
# Mandatory
P250=400
# SIP Timer D (0 - 64 seconds. Default 0)
# Number: 0~64
# Mandatory
P2387=0
# DTMF Payload Type
# Number: 96 to 127
P79=101
# Preferred DTMF method.
# 100 - In-audio, 101 - RFC2833, 102 - SIP INFO
# Priority 1
# Number: 100, 101, 102
# Mandatory
P850=101
# Priority 2
# Number: 100, 101, 102
# Mandatory
P851=102
# Priority 3
# Number: 100, 101, 102
# Mandatory
P852=100
# Force DTMF to be sent via SIP INFO simultaneously. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1
# Mandatory
P28794=1
# Inband DTMF Duration - duration. Default is 100.
# Number: 40 to 200 milliseconds
# Mandatory
P28134=100
# Inband DTMF Duration - inter-duration. Default is 50.
# Number: 40 to 200 milliseconds
# Mandatory
P28138=50
# Inband DTMF Tx Gain. Default is 0.
# Number: -12 - 12.
# Mandatory
P28772=0
# DSP DTMF Detector Duration Threshold - duration. Default is 30.
# Number: 20 to 200 milliseconds
# Mandatory
# P28201=30
# DSP DTMF Detector Duration Threshold - inter-duration. Default is 30.
# Number: 20 to 200 milliseconds
# Mandatory
# P28205=30
# Disable DTMF Negotiation. 0 - No(negotiate with peer), 1 - Yes(use above DTMF order without negotiation)
# Number: 0, 1
# Mandatory
P4825=0
# Generate Continuous RFC2833 Events. 0 - No, 1 - Yes(RFC2833 events are generated until key is released)
# Number: 0, 1
# Mandatory
P4433=0
# Send Hook Flash Event. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P74=0
# Flash Digit Control. 0 - No, 1 - Yes(Hook Flash will be sent as a DTMF event if set to Yes)
# Number: 0, 1
# Mandatory
P28080=0
# Callee Flash to 3WC. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P28169 = 0
# Offhook Auto-Dial (User ID/extension to dial automatically when offhook)
# String: 0-9, #, *
# Mandatory
P71=
# Offhook Auto-Dial Delay (0-60 seconds, default is 0)
# Number: 0 to 60
P4045=0
# Offhook Auto-Dial DTMF
# String
# Maximum Length: 10
P28182=
# Proxy-Require
# IP Address
P197=
# Use NAT IP (used in SIP/SDP message if specified)
# IP Address
P101=
# SIP User-Agent.
# String
P29071=
# Use SIP User-Agent Postfix
P4834=
# MAC in User-Agent. 0 - No, 1 - Yes except REGISTER, 2.- Yes to all SIP. Default is 0.
# Number: 0, 1, 2
# Mandatory
# P26061 = 0
# Use MAC Header. 0 - No, 1 - REGISTER Only, 2.- Yes to all request SIP. Default is 0.
# Number: 0, 1, 2
# Mandatory
# P29090 = 0
# RFC2543 Hold. 0 - No, 1 - Yes. Default is 1.
# Number: 0, 1
# Mandatory
P26062 = 1
# Disable Call-Waiting. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P91=0
# Disable Call-Waiting Caller ID. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P714=0
# Disable Call-Waiting Tone. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P186=0
# Disable Connected Line ID. 0 - No, 1 - Yes. Default is 0.(If yes, Connected Line ID will not be displayed even received.)
# Number: 0, 1
# Mandatory
P20525=0
# Disable Receiver Offhook Tone. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P4793=0
# Disable Reminder Ring for On-Hold Call:
# Number: 0, 1
# Mandatory
P4360=0
# Disable Reminder Ring for DND. 0 - No, 1 - Yes. Default is 1.
# Number: 0, 1
# Mandatory
P29072=1
# Disable Visual MWI. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P855=0
# Visual MWI Type. 1 - FSK, 2 - NEON. Default is 1.
# Number: 1, 2
# Mandatory
P4371 = 1
# MWI Tone. 0 - Default, 1 - Special Proceed Indication Tone
# Number: 0, 1
# Mandatory
P28197 = 0
# Ringback Tone at No Early Media. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1.
# Mandatory
P60073=0
# Do Not Escape '#' as %23 in SIP URI. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P1406=0
# Disable Multiple m line in SDP. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P137=0
# Ring Timeout. (0-300, default is 60 seconds, 0 is unlimited ring timeout)
# Number: 0-300
# Mandatory
P185=60
# Delayed Call Forward Wait Time. Allowed range 1-120, in seconds. Default 20 seconds.
# Number: 1-120
# Mandatory
P139=20
# No Key Entry Timeout. Default - 4 seconds.
# Number: 1-15
# Mandatory
P85=4
# Early Dial. 0 - No, 1 - Yes (use "Yes" only if proxy supports 484 response)
# Number: 0, 1
# Mandatory
P29=0
# Dial Plan Prefix.(this prefix string is added to each dialed number)
# String; between ascii values 33 and 126
P66=
# Use # as Dial Key. 0 - No, 1 - Yes (if set to Yes, "#" will function as the "(Re-)Dial" key)
# Number: 0, 1
# Mandatory
P72=1
# Disable # as Redial Key. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P28147 = 0
# Dial Plan
# String
P4200={ x+ | \+x+ | *x+ | *xx*x+ }
# SUBSCRIBE for MWI. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P99=0
# Subscribe Retry Wait Time upon 403 Forbidden. Default is 0.
# Number: 0 to 10080 (0-10080 in minutes. Default is 0, max 7 days)
P60068= 0
# Send Anonymous. 0 - No, 1 - Yes (caller ID will be blocked if set to Yes)
# Number: 0, 1
# Mandatory
P65=0
# Anonymous Call Rejection. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P129=0
# Special Feature
# STANDARD=100, BROADSOFT=102, CBCOM=108, RNK=109, HUAWEI=111, CHINA MOBILE = 113
# ZTE_IMS=114, PHONEPOWER=119, TELKOM_SA=120, VONAGE=121, METASWITCH = 122, CENTURYLINK = 124, MTS = 126, Oi_BR = 132, ROSTELECOM - 133, IZZI - 135, GIBTELECOM - 138.
# Number: 100, 102, 108, 109, 111, 113, 114, 119, 120, 121, 122, 124, 126, 132, 133, 135, 138
# Mandatory
P198=100
# Enable Session Timer. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P2395=1
# Session Expiration (in seconds. default 180 seconds. Allowed value: 90-64800)
# Number: 90-64800
# Mandatory
P260=180
# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260)
# Number: 90-64800
# Mandatory
P261=90
# Caller Request Timer (Request for timer when calling) 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P262=0
# Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P263=0
# Force Timer (Still use timer when remote party does not support timer) 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P264=0
# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
# Number: 0, 1, 2
# Mandatory
P266=0
# UAS Specify Refresher. 1 - UAC, 2 - UAS
# Number: 1, 2
# Mandatory
P267=1
# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P265=0
# When To Restart Session After Re-INVITE received. 0 - Immediately, 1 - After replying 200OK. Default is 0.
# Number: 0,1
# Mandatory
P28744=0
# Enable 100rel. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P272=0
# Add Auth Header On Initial REGISTER. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P2359=0
# Enable Call Waiting Alert-Info in 180 Ringing Response . 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P60064 = 0
# Conference URI
P2318=
#################################################################################
# Codec/Voice Quality settings #
#################################################################################
# Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P4363=0
# Preferred Vocoder
# 0 - PCMU, 8 - PCMA, 4 - G.723, 18 - G.729, 2 - G.726-32, 97 - iLBC, 123 - OPUS， 9 - G722.
# Choice 1.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P57=0
# Choice 2.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P58=8
# Choice 3.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P59=4
# Choice 4.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P60=18
# Choice 5.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P61=2
# Choice 6.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P62=97
# Choice 7.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P46=123
# Choice 8.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P98=9
# Voice Frames per TX
# Number: 1-9
# Mandatory
P37=2
# G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate
# Number: 0, 1
# Mandatory
P49=0
# iLBC Frame Size. 0 - 20ms(default), 1 - 30ms.
# Number: 0, 1
# Mandatory
P97=0
# Disable OPUS Stereo in SDP. 0 - No, 1 - Yes(remove "/2" from offer).Default is 0.
# Number: 0, 1
# Mandatory
P20529 = 0
# iLBC payload type. (between 96 and 127, default is 97).
# Number: 96-127
# Mandatory
P96=97
# OPUS Payload Type. (between 96 and 127, default is 120).
# Number: 96-127
# Mandatory
P2385=120
# VAD. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P50=0
# Symmetric RTP. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P291=0
# FAX Mode. 0 - T.38 (Auto Detect), 1 - Pass Through
# Number: 0, 1
# Mandatory
P228=0
# Re-INVITE After Fax Tone Detected. 0 - Disabled, 1 - Enabled.
# Number: 0, 1
# Mandatory
P4416=1
# Jitter buffer type. 0 - Fixed, 1 - Adaptive
# Number: 0, 1
# Mandatory
P133=1
# Jitter buffer length. 0 - Low, 1 - Medium, 2 - High
# Number: 0, 1, 2
# Mandatory
P132=1
# SRTP Mode
# 0=Disabled
# 1=Enabled but not forced
# 2=Enabled and forced
# Number: 0, 1, 2
# Mandatory
P183=0
# SRTP Key Length. 0 - AES 128&256 bit, 1 - AES 128 bit, 2 - AES 256 bit. Default is 0.
# Number:0,1,2
# Mandatory
P2383=0
# Crypto Life Time
# 0=Disabled
# 1=Enabled
# Number: 0, 1
# Mandatory
P2363=1
#################################################################################
# SLIC Setting.
# 0 - USA (BELLCORE 600 ohms), 3 - USA 2(BELCORE 600 ohms + 2.16uF), 11 - AUSTRAILA, 5 - CHINA CO, 6 - CHINA PBX, 4 - EUROPEAN CTR21
# 9 - GERMANY, 8 -INDIA/NEW ZEALAND, 2 - JAPAN CO, 7 - JAPAN PBX, 1 - STANDARD 900 omhs, 10 - UK
# Number: 0-11
# Mandatory
P854=0
# Caller ID Scheme.
# <value=0> Bellcore/Telcordia (default)
# <value=1> ETSI-FSK during ringing
# <value=2> ETSI-FSK prior to ringing with DTAS
# <value=3> ETSI-FSK prior to ringing with LR+DTAS
# <value=4> ETSI-FSK prior to ringing with RP
# <value=5> ETSI-DTMF during ringing
# <value=6> ETSI-DTMF prior to ringing with DTAS
# <value=7> ETSI-DTMF prior to ringing with LR+DTAS
# <value=8> ETSI-DTMF prior to ringing with RP
# <value=9> SIN 227 - BT
# <value=10> NTT Japan
# <value=11> DTMF Denmark prior to ringing no DTAS no LR
# <value=12> DTMF Denmark prior to ringing with LR
# <value=13> DTMF Sweden/Finalnd prior to ringing with LR
# <value=14> DTMF Brazil
# Number: 0-14
# Mandatory
P853=0
# DTMF Caller ID Start Tone
# <value=0> Default
# <value=1> A
# <value=2> B
# <value=3> C
# <value=4> D
# <value=5> #
# Number: 0-5
# Mandatory
P4661=0
# DTMF Caller ID Stop Tone
# <value=0> Default
# <value=1> A
# <value=2> B
# <value=3> C
# <value=4> D
# <value=5> #
# Number: 0-5
# Mandatory
P4662=0
# Disable Unknown Caller ID. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P28153 = 0
# Replace Beginning '+' in Caller ID with.
# String: characters 0 – 9, +, #. Max Length is 6
P60083 = 0
# Number of Beginning Digits to Strip from Caller ID. Default is 0.
# Number: 0 - 10.
# Mandatory
P29096=0
#Caller ID Transmission Mode. 0 – Default, 1 – Legacy (Caller name is not sent).Default is 0.
#Number: 0, 1
P60095=0
# Polarity Reversal. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P205=0
# Loop Current Disconnect. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P892=0
# Play busy/reorder tone before Loop Current Disconnect. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P21925 = 0
# Loop Current Disconnect Duration. In 100 - 10000 milliseconds range, default is 200.
# Number: 100-10000
# Mandatory
P856=200
# Enable Pulse Dialing. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P20521 = 0
# Pulse Dialing Standard. 0 - General Standard, 1 - Swedish Standard, 2 - New Zealand Standard
# Number: 0, 1, 2
# Mandatory
P28165=0
# Enable Hook Flash
# Number: 0, 1
# 0 - No, 1 - Yes, default is Yes
# Mandatory
P4424=1
# Hook Flash Timing. In 40-2000 milliseconds range
# minimum
# Number: 40-2000
# Mandatory
P251=300
# maximum
# Number: 40-2000
# Mandatory
P252=1100
# On Hook Timing. (In 40-2000 milliseconds range, default is 400)
# Number: 40-2000
# Mandatory
P833=400
# Gain:
# TX
# <value=1> +6dB
# <value=2> +4dB
# <value=3> +2dB
# <value=0> 0dB
# <value=4> -2dB
# <value=5> -4dB
# <value=6> -6dB
# Number: 0, 1, 2, 3, 4, 5, 6
# Mandatory
P247=0
# RX
# <value=1> +6dB
# <value=2> +4dB
# <value=3> +2dB
# <value=0> 0dB
# <value=4> -2dB
# <value=5> -4dB
# <value=6> -6dB
# Number: 0, 1, 2, 3, 4, 5, 6
# Mandatory
P249=0
# Disable Line Echo Canceller (LEC). 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P824=0
# Disable Network Echo Suppressor. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P4441=0
# Outgoing Call Duration Limit. (0-180 minutes, default is 0 (No Limit))
# Number: 0 - 180
# Mandatory
P4420=0
# Incoming Call Duration Limit. (0-180 minutes, default is 0 (No Limit))
# Number: 0 - 180. (0 is No Limit)
# Mandatory
P28760=0
# Ring Frequency. 20 - 20Hz default, 25 - 25Hz. Default is 20.
# Number: 20, 25
# Mandatory
P4429 = 20
# Enable High Ring Power. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P4234=0
# OnHook DC Feed Current. 0 - 20mA, 2 - 30mA default. Defualt is 30mA.
# Number: 0, 2
# Mandatory
P28192 = 2
# RFC2833 Events Count.Default is 8.
# Number: 0, 2-10.
# Mandatory
P28173 = 8
# RFC2833 End Events Count.
# Number: 2-10
# Mandatory
P28177 = 3
# RFC2833 Convert Mode. 0 – ATA Mode, 1 – DSP Normal Mode (Default), 2 – DSP Permanent Mode. Default is 0.
# Number: 0,1,2
# Mandatory
P28798=0
# Distinctive Ring Tone Choice 1
# 0 - Ring Tone 1, 1 - Ring Tone 2, 2 - Ring Tone 3, 3 - Ring Tone 4, 4 - Ring Tone 5,
# 5 - Ring Tone 6, 6 - Ring Tone 7, 7 - Ring Tone 8, 8 - Ring Tone 9, 9 - Ring Tone 10
# Distinctive Ring Tone Choice 1
# Number: 0-9
# Mandatory
P870=0
# Choice 1 incoming caller ID
# String
P871=
# Distinctive Ring Tone Choice 2
# 0 - Ring Tone 1, 1 - Ring Tone 2, 2 - Ring Tone 3, 3 - Ring Tone 4, 4 - Ring Tone 5,
# 5 - Ring Tone 6, 6 - Ring Tone 7, 7 - Ring Tone 8, 8 - Ring Tone 9, 9 - Ring Tone 10
# Distinctive Ring Tone Choice 1
# Number: 0-9
# Mandatory
P872=0
# Choice 2 incoming caller ID
# String
P873=
# Distinctive Ring Tone Choice 3
# 0 - Ring Tone 1, 1 - Ring Tone 2, 2 - Ring Tone 3, 3 - Ring Tone 4, 4 - Ring Tone 5,
# 5 - Ring Tone 6, 6 - Ring Tone 7, 7 - Ring Tone 8, 8 - Ring Tone 9, 9 - Ring Tone 10
# Distinctive Ring Tone Choice 1
# Number: 0-9
# Mandatory
P874=0
# Choice 3 incoming caller ID
# String
P875=
# Ring Tone 1
# String
P4010=c=2000/4000;
# Ring Tone 2
# String
P4011=c=2000/4000;
# Ring Tone 3
# String
P4012=c=2000/4000;
# Ring Tone 4
# String
P4013=c=2000/4000;
# Ring Tone 5
# String
P4014=c=2000/4000;
# Ring Tone 6
# String
P4015=c=2000/4000;
# Ring Tone 7
# String
P4016=c=2000/4000;
# Ring Tone 8
# String
P4017=c=2000/4000;
# Ring Tone 9
# String
P4018=c=2000/4000;
# Ring Tone 10
# String
P4019=c=2000/4000;
# Distinctive Call Waiting Tone. Call Waiting Tone Choice 1 to Choice 3
# Number: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9
# 0 - Call Waiting Tone 1, 1- Call Waiting Tone 2, 2 - Call Waiting Tone 3, 3 - Call Waiting Tone 4, 4 - Call Waiting Tone 5, 5 - Call Waiting Tone 6, 6 - Call Waiting Tone 7, 8 - Call Waiting Tone 9, 9 - Call Waiting Tone 10
# Mandatory
P29074 = 0
P29075 = 0
P29076 = 0
# Used if incoming caller ID is. The caller ID to match the call waiting tone.
# String Max Length: 64
P29077 =
P29078 =
P29079 =
# Call Waiting Tone. Call Waiting Tone 1-10
# String Max Length: 64
# Mandatory
P29080 = f1=440@-13,c=300/10000;
P29081 = f1=440@-13,c=300/10000;
P29082 = f1=440@-13,c=300/10000;
P29083 = f1=440@-13,c=300/10000;
P29084 = f1=440@-13,c=300/10000;
P29085 = f1=440@-13,c=300/10000;
P29086 = f1=440@-13,c=300/10000;
P29087 = f1=440@-13,c=300/10000;
P29088 = f1=440@-13,c=300/10000;
P29089 = f1=440@-13,c=300/10000;
# Enable Call Features. 0 - No, 1 - Yes, 2 - Enable All
# Number: 0, 1, 2
# Mandatory
P191=1
# Reset Call Features. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24199=0
# SRTP Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24060=1
# Enable SRTP.
# Number
# Mandatory
P24001=16
# Disable SRTP.
# Number
# Mandatory
P24002=17
# SRTP per call Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24061=1
# Enable SRTP per call.
# Number
# Mandatory
P24003=18
# Disable SRTP per call.
# Number
# Mandatory
P24004=19
# CID Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24062=1
# Enable CID.
# Number
# Mandatory
P24006=31
# Disable CID.
# Number
# Mandatory
P24005=30
# CID per call Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24065=1
# Enable CID per call.
# Number
# Mandatory
P24019=82
# Disable CID per call.
# Number
# Mandatory
P24010=67
# Direct IP Calling Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24063=1
# Direct IP Calling.
# Number
# Mandatory
P24007=47
# CW Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24064=1
# Enable CW.
# Number
# Mandatory
P24009=51
# Disable CW.
# Number
# Mandatory
P24008=50
# CW per call Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24067=1
# Enable CW per call.
# Number
# Mandatory
P24013=71
# Disable CW per call.
# Number
# Mandatory
P24012=70
# Call Return Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24066=1
# Call Return.
# Number
# Mandatory
P24011=69
# Unconditional Forward Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24068=1
# Enable Unconditional Forward.
# Number
# Mandatory
P24014=72
# Disable Unconditional Forward.
# Number
# Mandatory
P24015=73
# Busy Forward Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24072=1
# Enable Busy Forward.
# Number
# Mandatory
P24021=90
# Disable Busy Forward.
# Number
# Mandatory
P24022=91
# Delayed Forward Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24073=1
# Enable Delayed Forward.
# Number
# Mandatory
P24023=92
# Disable Delayed Forward.
# Number
# Mandatory
P24024=93
# Paging Feature. 0 - No, 1 - Yes
# Number
# Mandatory
P24069=1
# Paging
# Number
# Mandatory
P24016=74
# DND Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24070=1
# Enable DND.
# Number
# Mandatory
P24017=78
# Disable DND.
# Number
# Mandatory
P24018=79
# Blind Transfer Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24071=1
# Enable Blind Transfer.
# Number
# Mandatory
P24020=87
# Disable LEC per call Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24074=1
# Disable LEC per call.
# Number
# Mandatory
P24025=03
# Disable Bellcore Style 3-Way Conference. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P4830=0
# Star Code 3WC Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24075=1
# Star Code 3WC.
# Number
# Mandatory
P24026=23
# Play registration id Feature. 0 - No, 1 - Yes
# Number
# Mandatory
P24087=1
# Enable playing registration id. Default is 98.
# String: digital. Min Length 2 characters, Max Length 2 characters.
# Mandatory
P24038=98
# Set Offhook Auto-Dial Feature. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1
# Mandatory
P24089=1
# Enable Set Offhook Auto-Dial. Default is 77.
# String: digital. Min Length 2 characters, Max Length 2 characters.
# Mandatory
P24040=77
# Forced Codec Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24059=1
# Forced Codec.
# Number
# Mandatory
P24000=02
# PCMU Codec Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24076=1
# PCMU Codec.
# Number
# Mandatory
P24027=7110
# PCMA Codec Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24077=1
# PCMA Codec.
# Number
# Mandatory
P24028=7111
# G723 Codec Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24078 = 1
# G723 Codec.
# Number
# Mandatory
P24029 = 723
# G729 Codec Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24079 = 1
# G729 Codec.
# Number
# Mandatory
P24030 = 729
# iLBC Codec Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24084 = 1
# iLBC Codec.
# Number
# Mandatory
P24035 = 7201
# G722 Codec Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24085=1
# G722 Codec.
# Number
# Mandatory
P24036 = 722
##############################################################################
## FXS PORT 2 Settings. (HT802 Only) ##
##############################################################################
# Account Active. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P401=1
# Primary SIP Server
# Server address
P747=
# Failover SIP Server
# Server address
P987=
# Prefer Primary SIP Server. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P4568=0
# Outbound Proxy
# Server address
P748=
# Backup Outbound Proxy
# Server address
P2433 =
#Prefer Primary Outbound Proxy. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P28097 = 0
# From Domain
# String
P8618=
# SIP Transport 0 - UDP, 1 - TCP, 2 - TLS
# Number: 0, 1, 2
# Mandatory
P830=0
# SIP URI Scheme When Using TLS. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P2429=1
# Use Actual Ephemeral Prot in Contact with TCP/TLS. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P2431=0
# NAT Traversal. 0 - No, 1 - STUN, 2 - Keep-Alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0.
# Number: 0, 1, 2, 3, 4, 5
# Mandatory
P730=0
# SIP User ID
# String
P735=
# Authentication ID
# String
P736=
# Authentication password
# String
P734=
# Name (John Doe)
# String
P703=
# DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP.
# Number: 0, 1, 2, 3
# Mandatory
P702=0
# DNS SRV Failover Mode. 0 – Default, 1 – Saved one until TTL, 2 - Saved one until no response
# Number: 0, 1, 2
# Mandatory
P26140=0
# Failback Timer
# Number: 60-64800
# Mandatory
P60156 = 60
# Register Before DNS SRV Failover. 0 – No, 1 – Yes
# Number: 0, 1
# Mandatory
P29195=0
# Primary IP
# String
# Maximum Length: 15
P2408=
# Backup IP1
# String
# Maximum Length: 15
P2409=
# Backup IP2
# String
# Maximum Length: 15
P2410=
# Tel URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled
# Number: 0, 1, 2
# Mandatory
P763=0
# SIP Registration. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P731=1
# Unregister On Reboot. 0 - No, 1 - All, 2 - Instance. Default is 0.
# Number: 0,1,2
# Mandatory
P752=0
# Outgoing call without Registration. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P813=1
# Register Expiration (in minutes. default 1 hour, max 45 days)
# Number: 1 to 64800
# Mandatory
P732=60
# Reregister before Expiration (in seconds. Default 0 second)
# Number: 1 to 64800
# Mandatory
P2430=0
# SIP Registration Failure Retry Wait Time, in seconds. Between 1-3600, default is 20
# Number: 1 to 3600
# Mandatory
P471=20
# SIP Registration Failure Retry Wait Time upon 403 Forbidden, in seconds. Between 1-3600, default is 1200, 0 means stop retry registration upon 403 response
# Number: 0 to 3600
# Mandatory
P26102=1200
# Port Voltage Off upon no SIP Registration or SIP Registration Failure. Default is 0.
# Number: 0 - 60. (0 means the port voltage is never turned off)
# Mandatory
P28757=0
# Delay Time of Port Voltage Off Timer Since Boot. Default is 0.
# Number: 0 - 60.
# Mandatory
P28785=0
# Enable SIP OPTIONS Keep Alive. 0 - No, 1 - Yes, default is 0
# Number: 0, 1
# Mandatory
P2497=0
# SIP OPTIONS Keep Alive Interval, in seconds. Between 1-64800, default is 30
# Number: 1 to 64800
# Mandatory
P2498=30
# SIP OPTIONS Keep Alive Max Lost, Number of max lost packets for SIP OPTIONS Keep Alive before re-registration. Between 3-10, default is 3
# Number: 3 to 10
# Mandatory
P2499=3
#Layer 3 QoS
#SIP DSCP (Diff-Serv value in decimal, default 24)
P5047=24
#RTP DSCP (Diff-Serv value in decimal, default 46)
P5051=46
# Local SIP port (default 5062)
# Number: 1 to 65535
# Mandatory
P740=5062
# Local RTP port (1024-65535, default 5012)
# Number: 1024 to 65535
# Mandatory
P739=5012
# Use Random SIP Port. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P20502=0
# Use Random RTP Port. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P20506=0
# Random RTP Port Range: Minimum RTP Port.
# Number: 1024 - 65535.
P60184=
# Random RTP Port Range: Maximum RTP Port
# Number: 1024 - 65535.
P60185=
# Enable RTCP. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P2492=1
# RTP/RTCP Keep Alive On Hold. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P28840 = 0
# Hold Target Before Refer. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P26103=1
# Refer-To Use Target Contact. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P469=0
# Transfer on Conference Hangup. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P4561=0
# Ringing Transfer. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P4821 = 0
# Remove OBP from Route Header. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P4563=0
# Support SIP Instance ID. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P489=1
# Support outbound. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1.
# Mandatory
P60181=0
# Support GRUU. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1.
# Mandatory
P60180=0
# Validate Incoming SIP Message. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P4341=0
# Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P449=0
# Authenticate incoming INVITE
# Number: 0, 1
# Mandatory
P2446=0
# Authenticate server certificate domain. 0 - No, 1 - Yes, default is 0
# Number: 0, 1
# Mandatory
P2411=0
# Trusted domain name list.
# (Support setting specific domain names and wildcard domain names, wildcard domain names such as "*.grandstream.com", use "," to separate domain names)
# String: max length 256 characters.
P60182=
# Authenticate server certificate chain. 0 - No, 1 - Yes, default is 0
# Number: 0, 1
# Mandatory
P2467=0
# Allow Incoming SIP Messages from SIP Proxy Only. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P743=0
# Use Privacy Header. 0 - Default, 1 - No, 2 - Yes
# Number: 0, 1, 2
# Mandatory
P2438=0
# Use P-Preferred-Identity Header. 0 - Default, 1 - No, 2 - Yes
# Number: 0, 1, 2
# Mandatory
P2439=0
# Use P-Access-Network-Info Header. 0 - No, 1 - Yes. Default is 1.
# Number: 0, 1
# Mandatory
P26158 = 1
# Use P-Emergency-Info Header. 0 - No, 1 - Yes. Default is 1.
# Number: 0, 1
# Mandatory
P26159 = 1
# Use P-Asserted-Identity Header. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P29198 = 0
# Use P-Early-Media Header. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1
# Mandatory
P60172=0
# SIP REGISTER Contact Header Uses. 0 - LAN address, 1 - WAN address
# Number: 0, 1, 2
# Mandatory
P4438=0
# Caller ID Fetch Order. 0 - Auto, 1 - Disable, 2 - From Header. Defaut is 0.
# Number: 0, 1, 2
# Mandatory
P2424=0
# Allow SIP Factory Reset. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P26115 = 0
# Maximum Number of SIP Request Retries. Default is 2.
# Number: 1-10
# Mandatory
P60155 = 2
# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 50.
# Number: 50, 100, 200, 400, 800
# Mandatory
P440=50
# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses.
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec, 1600 - 16 sec, 3200 - 32 sec. Default 400.
# Number: 200, 400, 800, 1600, 3200
# Mandatory
P441=400
# SIP Timer D (0 - 64 seconds. Default 0)
# Number: 0~64
# Mandatory
P2487=0
# DTMF Payload Type
# Number: 96 to 127
P779=101
# Preferred DTMF method.
# 100 - In-audio, 101 - RFC2833, 102 - SIP INFO
# Priority 1
# Number: 100, 101, 102
# Mandatory
P860=101
# Priority 2
# Number: 100, 101, 102
# Mandatory
P861=102
# Priority 3
# Number: 100, 101, 102
# Mandatory
P862=100
# Force DTMF to be sent via SIP INFO simultaneously. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1
# Mandatory
P28795=1
# Inband DTMF Duration - duration. Default is 100.
# Number: 40 to 200 milliseconds
# Mandatory
P28135=100
# Inband DTMF Duration - duration and inter-duration. Default is 50.
# Number: 40 to 200 milliseconds
# Mandatory
P28139=50
# Inband DTMF Tx Gain. Default is 0.
# Number: -12 - 12.
# Mandatory
P28773=0
# DSP DTMF Detector Duration Threshold - duration. Default is 30.
# Number: 20 to 200 milliseconds
# Mandatory
P28202=30
# DSP DTMF Detector Duration Threshold - inter-duration. Default is 30.
# Number: 20 to 200 milliseconds
# Mandatory
#P28206=30
# Disable DTMF Negotiation. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P4826=0
# Generate Continuous RFC2833 Events. 0 - No, 1 - Yes(RFC2833 events are generated until key is released)
# Number: 0, 1
# Mandatory
P4434=0
# Send Flash Event. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P774=0
# Flash Digit Control. 0 - No, 1 - Yes(Hook Flash will be sent as a DTMF event if set to Yes)
# Number: 0, 1
# Mandatory
P28081=0
# Callee Flash to 3WC. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P28170 = 0
# Offhook Auto-Dial (User ID/extension to dial automatically when offhook)
# String: 0-9, *, #
P771=
# Offhook Auto-Dial Delay (0-60 seconds, default is 0)
# Number: 0 to 60
P4046=0
# Offhook Auto-Dial DTMF
# String
# Maximum Length: 10
P28183=
# Proxy-Require
# IP Address
P792=
# Use NAT IP (used in SIP/SDP message if specified)
# IP Address
P866=
# SIP User-Agent.
# String
P29171=
# Use SIP User-Agent Postfix
# String
P4835=
# MAC in User-Agent. 0 - No, 1 - Yes except REGISTER, 2.- Yes to all SIP. Default is 0.
# Number: 0, 1, 2
# Mandatory
# P26161 = 0
# Use MAC Header. 0 - No, 1 - REGISTER Only, 2.- Yes to all request SIP. Default is 0.
# Number: 0, 1, 2
# Mandatory
# P29190 = 0
# RFC2543 Hold. 0 - No, 1 - Yes. Default is 1.
# Number: 0, 1
# Mandatory
P26162 = 1
# Disable Call-Waiting. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P791=0
# Disable Call-Waiting Caller ID. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P823=0
# Disable Call-Waiting Tone. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P817=0
# Disable Connected Line ID. 0=Disabled, 1=Enabled. Default is 0.(If yes, Connected Line ID will not be displayed even received.)
# Number: 0, 1
# Mandatory
P20526=0
# Disable Receiver Offhook Tone. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P4794=0
# Disable Reminder Ring for On-Hold Call:
# Number: 0, 1
# Mandatory
P4361=0
# Disable Reminder Ring for DND. 0 - No, 1 - Yes. Default is 1.
# Number: 0, 1
# Mandatory
P29172=1
# Disable Visual MWI. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P869=0
# Visual MWI Type. 1 - FSK, 2 - NEON. Default is 1.
# Number: 1, 2
# Mandatory
P4372 = 1
# MWI Tone. 0 - Default, 1 - Special Proceed Indication Tone
# Number: 0, 1
# Mandatory
P28198 = 0
# Ringback Tone at No Early Media. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1.
# Mandatory
P60173=0
# Do Not Escape '#' as %23 in SIP URI. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P4895=0
# Disable Multiple m line in SDP. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P487=0
# Ring Timeout. (0-300, default is 60 seconds, 0 is unlimited ring timeout)
# Number: 0-300
# Mandatory
P816=60
# Delayed Call Forward Wait Time. Allowed range 1-120, in seconds. Default 20 seconds.
# Number: 1-120
# Mandatory
P470=20
# No Key Entry Timeout. Default - 4 seconds.
# Number: 1-15
# Mandatory
P292=4
# Early Dial. 0 - No, 1 - Yes (use "Yes" only if proxy supports 484 response)
# Number: 0, 1
# Mandatory
P729=0
# Dial Plan Prefix.(this prefix string is added to each dialed number)
# String
P766=
# Use # as Dial Key. 0 - No, 1 - Yes (if set to Yes, "#" will function as the "(Re-)Dial" key)
# Number: 0, 1
# Mandatory
P772=1
# Disable # as Redial Key. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P28148 = 0
# Dial Plan
# String
P4201={ x+ | \+x+ | *x+ | *xx*x+ }
# SUBSCRIBE for MWI. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P709=0
# Subscribe Retry Wait Time upon 403 Forbidden. Default is 0.
# Number: 0 to 10080 (0-10080 in minutes. Default is 0, max 7 days)
P60168= 0
# Send Anonymous. 0 - No, 1 - Yes (caller ID will be blocked if set to Yes)
# Number: 0, 1
# Mandatory
P765=0
# Anonymous Call Rejection. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P446=0
# Special Feature
# STANDARD=100, BROADSOFT=102, CBCOM=108, RNK=109, HUAWEI=111, CHINA MOBILE = 113
# ZTE_IMS=114, PHONEPOWER=119, TELKOM_SA=120, VONAGE=121, METASWITCH = 122, CENTURYLINK = 124, MTS = 126, Oi_BR = 132, ROSTELECOM - 133, IZZI - 135, GIBTELECOM - 138.
# Number: 100, 102, 108, 109, 111, 113, 114, 119, 120, 121, 122, 124, 126, 132, 133, 135, 138
P767=100
# Enable Session Timer. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P2495=1
# Session Expiration (in seconds. default 180 seconds. Allowed value: 90-64800)
# Number: 90-64800
# Mandatory
P434=180
# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260)
# Number: 90-64800
# Mandatory
P427=90
# Caller Request Timer (Request for timer when calling) 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P428=0
# Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P429=0
# Force Timer (Still use timer when remote party does not support timer) 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P430=0
# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
# Number: 0, 1, 2
# Mandatory
P432=0
# UAS Specify Refresher. 1 - UAC, 2 - UAS
# Number: 1, 2
# Mandatory
P433=1
# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P431=0
# When To Restart Session After Re-INVITE received. 0 - Immediately, 1 - After replying 200OK. Default is 0.
# Number: 0,1
# Mandatory
P28745=0
# Enable 100rel. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P435=0
# Add Auth Header On Initial REGISTER. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P2459=0
# Enable Call Waiting Alert-Info in 180 Ringing Response . 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P60164 = 0
#Conference URI
P2418 =
#################################################################################
# Codec/Voice Quality settings #
#################################################################################
# Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P4364=0
# Preferred Vocoder
# 0 - PCMU, 8 - PCMA, 4 - G.723, 18 - G.729, 2 - G.726-32, 97 - iLBC, 123 - OPUS， 9 - G722
# Choice 1.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P757=0
# Choice 2.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P758=8
# Choice 3.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P759=4
# Choice 4.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P760=18
# Choice 5.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P761=2
# Choice 6.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P762=97
# Choice 7.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P814=123
# Choice 8.
# Number: 0, 2, 4, 8, 9， 18, 97, 123
# Mandatory
P815=9
# Voice Frames per TX
# Number: 1-9
# Mandatory
P737=2
# G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate
# Number: 0, 1
# Mandatory
P749=0
# iLBC Frame Size. 0 - 20ms(default), 1 - 30ms.
# Number: 0, 1
# Mandatory
P705=0
# Disable OPUS Stereo in SDP. 0 - No, 1 - Yes(remove "/2" from offer). Default is 0
# Number: 0, 1
# Mandatory
P20530 = 0
# iLBC payload type. (between 96 and 127, default is 97).
# Number: 96 to 127
# Mandatory
P704=97
# OPUS Payload Type. (between 96 and 127, default is 120).
# Number: 96-127
# Mandatory
P2485=120
# VAD. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P750=0
# Symmetric RTP. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P460=0
# FAX Mode. 0 - T.38 (Auto Detect), 1 - Pass Through
# Number: 0, 1
# Mandatory
P710=0
# Re-INVITE After Fax Tone Detected. 0 - Disabled, 1 - Enabled.
# Number: 0, 1
# Mandatory
P4417=1
# Jitter buffer type. 0 - Fixed, 1 - Adaptive
# Number: 0, 1
# Mandatory
P831=1
# Jitter buffer length. 0 - Low, 1 - Medium, 2 - High
# Number: 0, 1, 2
# Mandatory
P832=1
# SRTP Mode
# 0=Disabled
# 1=Enabled but not forced
# 2=Enabled and forced
# Number: 0, 1, 2
# Mandatory
P443=0
# SRTP Key Length. 0 - AES 128&256 bit, 1 - AES 128 bit, 2 - AES 256 bit. Default is 0.
# Number:0,1,2
# Mandatory
P2483=0
# Crypto Life Time
# 0=Disabled
# 1=Enabled
# Number: 0, 1
# Mandatory
P2463=1
#################################################################################
# SLIC Setting.
# 0 - USA (BELLCORE 600 ohms), 1 - STANDARD 900 ohms, 2 - JAPAN CO, 3 - USA 2 (BELLCORE 600 ohms + 2.16uF), 4 - EUROPEAN CTR21, 5 - CHINA CO
# 6 - CHINA PBX, 7 -JAPAN PBX, 8 - INDIA/NEW ZEALAND, 9 - GERMANY, 10 - UK, 11 - AUSTRALIA,
# Number: 0 to 11
# Mandatory
P864=0
# Caller ID Scheme.
# <value=0> Bellcore/Telcordia (default)
# <value=1> ETSI-FSK during ringing
# <value=2> ETSI-FSK prior to ringing with DTAS
# <value=3> ETSI-FSK prior to ringing with LR+DTAS
# <value=4> ETSI-FSK prior to ringing with RP
# <value=5> ETSI-DTMF during ringing
# <value=6> ETSI-DTMF prior to ringing with DTAS
# <value=7> ETSI-DTMF prior to ringing with LR+DTAS
# <value=8> ETSI-DTMF prior to ringing with RP
# <value=9> SIN 227 - BT
# <value=10> NTT Japan
# <value=11> DTMF Denmark prior to ringing no DTAS no LR
# <value=12> DTMF Denmark prior to ringing with LR
# <value=13> DTMF Sweden/Finalnd prior to ringing with LR
# <value=14> DTMF Brazil
# Number: 0 to 14
# Mandatory
P863=0
# DTMF Caller ID Start Tone
# <value=0> Default
# <value=1> A
# <value=2> B
# <value=3> C
# <value=4> D
# <value=5> #
# Number: 0-5
# Mandatory
P4663=0
# DTMF Caller ID Stop Tone
# <value=0> Default
# <value=1> A
# <value=2> B
# <value=3> C
# <value=4> D
# <value=5> #
# Number: 0-5
# Mandatory
P4664=0
# Disable Unknown Caller ID. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P28154 = 0
# Replace Beginning '+' in Caller ID with.
# String: characters 0 - 9, +, #. Max Length is 6.
P60183=0
# Number of Beginning Digits to Strip from Caller ID. Default is 0.
# Number: 0 - 10.
# Mandatory
P29196=0
#Caller ID Transmission Mode. 0 – Default, 1 – Legacy (Caller name is not sent).Default is 0.
#Number: 0, 1
P60195=0
# Polarity Reversal. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P865=0
# Loop Current Disconnect. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P893=0
# Play busy/reorder tone before Loop Current Disconnect. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P21926 = 0
# Loop Current Disconnect Duration. In 100 - 10000 milliseconds range, default is 200.
# Number: 100 to 10000
# Mandatory
P857=200
# Enable Pulse Dialing. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P20522 = 0
# Pulse Dialing Standard. 0 - General Standard, 1 - Swedish Standard, 2 - New Zealand Standard
# Number: 0, 1, 2
# Mandatory
P28166=0
# Enable Hook Flash
# Number: 0, 1
# 0 - No, 1 - Yes, default is Yes
# Mandatory
P4425=1
# Hook Flash Timing. In 40-2000 milliseconds range.
# minimum
# Number: 40 to 2000
# Mandatory
P811=300
# maximum
# Number: 40 to 2000
# Mandatory
P812=1100
# On Hook Timing. (In 40-2000 milliseconds range, default is 400)
# Number: 40 to 2000
# Mandatory
P834=400
# Gain:
# TX
# <value=1> +6dB
# <value=2> +4dB
# <value=3> +2dB
# <value=0> 0dB
# <value=4> -2dB
# <value=5> -4dB
# <value=6> -6dB
# Number: 0, 1, 2, 3, 4, 5, 6
# Mandatory
P248=0
# RX
# <value=1> +6dB
# <value=2> +4dB
# <value=3> +2dB
# <value=0> 0dB
# <value=4> -2dB
# <value=5> -4dB
# <value=6> -6dB
# Number: 0, 1, 2, 3, 4, 5, 6
# Mandatory
P283=0
# Disable Line Echo Canceller (LEC). 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P825=0
# Disable Network Echo Suppressor. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P4442=0
# Outgoing Call Duration Limit. (0-180 minutes, default is 0 (No Limit))
# Number: 0 - 180
# Mandatory
P4421=0
# Incoming Call Duration Limit. (0-180 minutes, default is 0 (No Limit))
# Number: 0 - 180. (0 is No Limit)
# Mandatory
P28761=0
# Ring Frequency. 20 - 20Hz default, 25 - 25Hz. Default is 20.
# Number: 20, 25
# Mandatory
P4430 = 20
# Enable High Ring Power. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P4235=0
# OnHook DC Feed Current. 0 - 20mA, 2 - 30mA default. Defualt is 30mA.
# Number: 0, 2
# Mandatory
P28193 = 2
# RFC2833 Events Count. Default is 8.
# Number: 0, 2-10
# Mandatory
P28174 = 8
# RFC2833 End Events Count.
# Number: 2-10
# Mandatory
P28178 = 3
# RFC2833 Convert Mode. 0 – ATA Mode, 1 – DSP Normal Mode (Default), 2 – DSP Permanent Mode. Default is 0.
# Number: 0,1,2
# Mandatory
P28799=0
# Distinctive Ring Tone Choice 1
# 0 - Ring Tone 1, 1 - Ring Tone 2, 2 - Ring Tone 3, 3 - Ring Tone 4, 4 - Ring Tone 5,
# 5 - Ring Tone 6, 6 - Ring Tone 7, 7 - Ring Tone 8, 8 - Ring Tone 9, 9 - Ring Tone 10
# Distinctive Ring Tone Choice 1
# Number: 0-9
# Mandatory
P880=0
# Choice 1 incoming caller ID
# String
P881=
# Distinctive Ring Tone Choice 2
# 0 - Ring Tone 1, 1 - Ring Tone 2, 2 - Ring Tone 3, 3 - Ring Tone 4, 4 - Ring Tone 5,
# 5 - Ring Tone 6, 6 - Ring Tone 7, 7 - Ring Tone 8, 8 - Ring Tone 9, 9 - Ring Tone 10
# Distinctive Ring Tone Choice 1
# Number: 0-9
# Mandatory
P882=0
# Choice 2 incoming caller ID
# String
P883=
# Distinctive Ring Tone Choice 3
# 0 - Ring Tone 1, 1 - Ring Tone 2, 2 - Ring Tone 3, 3 - Ring Tone 4, 4 - Ring Tone 5,
# 5 - Ring Tone 6, 6 - Ring Tone 7, 7 - Ring Tone 8, 8 - Ring Tone 9, 9 - Ring Tone 10
# Distinctive Ring Tone Choice 1
# Number: 0-9
# Mandatory
P884=0
# Choice 3 incoming caller ID
# String
P885=
# Ring Tone 1
# String
P4030=c=2000/4000;
# Ring Tone 2
# String
P4031=c=2000/4000;
# Ring Tone 3
# String
P4032=c=2000/4000;
# Ring Tone 4
# String
P4033=c=2000/4000;
# Ring Tone 5
# String
P4034=c=2000/4000;
# Ring Tone 6
# String
P4035=c=2000/4000;
# Ring Tone 7
# String
P4036=c=2000/4000;
# Ring Tone 8
# String
P4037=c=2000/4000;
# Ring Tone 9
# String
P4038=c=2000/4000;
# Ring Tone 10
# String
P4039=c=2000/4000;
# Distinctive Call Waiting Tone. Call Waiting Tone Choice 1 to Choice 3
# Number: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9
# 0 - Call Waiting Tone 1, 1- Call Waiting Tone 2, 2 - Call Waiting Tone 3, 3 - Call Waiting Tone 4, 4 - Call Waiting Tone 5, 5 - Call Waiting Tone 6, 6 - Call Waiting Tone 7, 8 - Call Waiting Tone 9, 9 - Call Waiting Tone 10
# Mandatory
P29174 = 0
P29175 = 0
P29176 = 0
# Used if incoming caller ID is. The caller ID to match the call waiting tone.
# String Max Length: 64
P29177 =
P29178 =
P29179 =
# Call Waiting Tone. Call Waiting Tone 1-10
# String Max Length: 64
# Mandatory
P29180 = f1=440@-13,c=300/10000;
P29181 = f1=440@-13,c=300/10000;
P29182 = f1=440@-13,c=300/10000;
P29183 = f1=440@-13,c=300/10000;
P29184 = f1=440@-13,c=300/10000;
P29185 = f1=440@-13,c=300/10000;
P29186 = f1=440@-13,c=300/10000;
P29187 = f1=440@-13,c=300/10000;
P29188 = f1=440@-13,c=300/10000;
P29189 = f1=440@-13,c=300/10000;
# Enable Call Features. 0 - No, 1 - Yes, 2 - Enable All
# Number: 0, 1,
# Mandatory
P751=1
# Reset Call Features. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24399=0
# SRTP Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24260 = 1
# Enable SRTP.
# Number
# Mandatory
P24201 = 16
# Disable SRTP.
# Number
# Mandatory
P24202 = 17
# SRTP per call Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24261 = 1
# Enable SRTP per call.
# Number
# Mandatory
P24203 = 18
# Disable SRTP per call.
# Number
# Mandatory
P24204 = 19
# CID Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24262 = 1
# Enable CID.
# Number
# Mandatory
P24206 = 31
# Disable CID.
# Number
# Mandatory
P24205 = 30
# CID per call Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24265 = 1
# Enable CID per call.
# Number
# Mandatory
P24219 = 82
# Disable CID per call.
# Number
# Mandatory
P24210 = 67
# Direct IP Calling Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24263 = 1
# Direct IP Calling.
# Number
# Mandatory
P24207 = 47
# CW Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24264 = 1
# Enable CW.
# Number
# Mandatory
P24209 = 51
# Disable CW.
# Number
# Mandatory
P24208 = 50
# CW per call Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24267 = 1
# Enable CW per call.
# Number
# Mandatory
P24213 = 71
# Disable CW per call.
# Number
# Mandatory
P24212 = 70
# Call Return Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24266 = 1
# Call Return.
# Number
# Mandatory
P24211 = 69
# Unconditional Forward Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24268 = 1
# Enable Unconditional Forward.
# Number
# Mandatory
P24214 = 72
# Disable Unconditional Forward.
# Number
# Mandatory
P24215 = 73
# Busy Forward Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24272 = 1
# Enable Busy Forward.
# Number
# Mandatory
P24221 = 90
# Disable Busy Forward.
# Number
# Mandatory
P24222 = 91
# Delayed Forward Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24273 = 1
# Enable Delayed Forward.
# Number
# Mandatory
P24223 = 92
# Disable Delayed Forward.
# Number
# Mandatory
P24224 = 93
# Paging Feature. 0 - No, 1 - Yes
# Number
# Mandatory
P24269 = 1
# Paging
# Number
# Mandatory
P24216 = 74
# DND Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24270 = 1
# Enable DND.
# Number
# Mandatory
P24217 = 78
# Disable DND.
# Number
# Mandatory
P24218 = 79
# Blind Transfer Feature. 0 – No, 1 – Yes.
# Number: 0, 1
# Mandatory
P24271 = 1
# Enable Blind Transfer.
# Number
# Mandatory
P24220 = 87
# Disable LEC per call Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24274 = 1
# Disable LEC per call.
# Number
# Mandatory
P24225 = 03
# Disable Bellcore Style 3-Way Conference. 0 - No, 1 - Yes.
# Number: 0, 1
# Mandatory
P4831=0
# Star Code 3WC Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24275 = 1
# Star Code 3WC.
# Number
# Mandatory
P24226 = 23
# Play registration id Feature. 0 - No, 1 - Yes
# Number
# Mandatory
P24287=1
# Enable playing registration id. Default is 98.
# String: digital. Min Length 2 characters, Max Length 2 characters.
# Mandatory
P24238=98
# Set Offhook Auto-Dial Feature. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1
# Mandatory
P24289=1
# Enable Set Offhook Auto-Dial. Default is 77.
# String: digital. Min Length 2 characters, Max Length 2 characters.
# Mandatory
P24240=77
# Forced Codec Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24259 = 1
# Forced Codec.
# Number
# Mandatory
P24200 = 02
# PCMU Codec Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24276 = 1
# PCMU Codec.
# Number
# Mandatory
P24227 = 7110
# PCMA Codec Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24277 = 1
# PCMA Codec.
# Number
# Mandatory
P24228 = 7111
# G723 Codec Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24278 = 1
# G723 Codec.
# Number
# Mandatory
P24229 = 723
# G729 Codec Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24279 = 1
# G729 Codec.
# Number
# Mandatory
P24230 = 729
# iLBC Codec Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24284 = 1
# iLBC Codec.
# Number
# Mandatory
P24235 = 7201
# G722 Codec Feature. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P24285 = 1
# G722 Codec.
# Number
# Mandatory
P24236 = 722
##############################################################################
## Basic Settings. ##
##############################################################################
# End User Password
# String
# P196=123
# New Viewer Password. Default is viewer.
# Max Character Number: 30
# P28113=viewer
# Web Session Timeout. In 1 to 60 minutes range. Default value is 10
# Number: 1 to 60
# Mandatory
P28116 = 10
# Web Access Attempt Limit. Default value is 5
# Number: 1 to 10
# Mandatory
P28117 = 5
# Web Lockout Duration. In 0 to 60 minutes range. Default value is 15
# Number: 0 to 60
# Mandatory
P1683 = 15
# Web Access Mode. 0 - HTTPS, 1 - HTTP, 2 - Disabled.
# Number: 0, 1
# Mandatory
P1650 = 1
# HTTP Web Port. Default HTTP is 80.
# Number: 1 to 65535
# Mandatory
P901=80
# HTTPS Web Port. Defaut HTTPS port is 443.
# Number: 1 to 65535
# Mandatory
P27010=443
# Disable SSH. 1 - Yes, 0 - No
# Number: 0, 1
# Mandatory
P276=0
# SSH Port. Default SSH port is 22.
# String
# Mandatory
P27006 = 22
# SSH Idle Timeout. Default is 0.
# Number: 0 - 86400. In seconds.
# Mandatory
P28163 = 0
# Disable Telnet. 0 - No, 1 - Yes. Default is 1.
# Number: 0, 1
# Mandatory
P28120 = 1
# Telnet Port. Default Telnet port is 23. This should be different from SSH port.
# String Max Length: 5
# Mandatory
P28128 = 23
# Security Controls for SSH/Telnet Access. 0 - Only allow SSH private IP users to set system Pvalue. 1 - Allow all SSH users to set system Pvalue
# 2 - Allow all SSH users to set any Pvalue. 3 - Allow any user to set any Pvalue. 4 - Prohibit setting Pvalue. Default is 3.
# Number: 0,1,2,3,4
# Mandatory
P28210=3
# Telnet Idle Timeout. Default is 0.
# Number: 0 - 86400. In seconds.
# Mandatory
P28164 = 0
# White List for WAN Side. Only the IP address in white list can access Web and SSH.
# String ipaddress
P20701=
# Black List for WAN Side. The IP address in black list can not access Web or SSH.
# String ipaddress
P20702=
# Internet Protocol. 0 - Both, prefer IPv4, 1 - Both, prefer IPv6, 2 - IPv4 Only, 3 - IPv6 Only. Default is IPv4 Only
# Number: 0, 1, 2, 3
# Mandatory
P1415 = 2
# IP Address. 0 - DHCP, 2 - PPPoE, 1 - Static IP
# Number: 0, 1, 2
# Mandatory
P8=0
#################################################################################
# DHCP
# DHCP Hostname, DHCP option 12. Max length allowed is 32 bytes.
P146=
# DHCP domain name
# String
# Maximum Length: 32
P147=
# DHCP Vendor Class ID, DHCP option 60. Max length allowed is 32 bytes.
# String
P148=HT802
#################################################################################
# PPPoE
# PPPoE account ID
# String
# P82=
# PPPoE password
# String
#P83=
# PPPoE Service Name
# String
#P269=
# 1st Preferred DNS server
# Number: 0 to 255
#P92=0
#P93=0
#P94=0
#P95=0
# 2nd Preferred DNS server
# Number: 0 to 255
#P5026=0
#P5027=0
#P5028=0
#P5029=0
# 3rd Preferred DNS server
# Number: 0 to 255
#P5030=0
#P5031=0
#P5032=0
#P5033=0
# 4th Preferred DNS server
# Number: 0 to 255
#P5034=0
#P5035=0
#P5036=0
#P5037=0
#################################################################################
# Static IP
# IP Address. Ignore if DHCP or PPPoE is used
# Number: 0 to 255
#P9=192
#P10=168
#P11=0
#P12=160
# Subnet mask. Ignore if DHCP or PPPoE is used
# Number: 0 to 255
#P13=255
#P14=255
#P15=0
#P16=0
# Router. Ignore if DHCP or PPPoE is used
# Number: 0 to 255
#P17=0
#P18=0
#P19=0
#P20=0
# DNS 1. Ignore if DHCP or PPPoE is used
# Number: 0 to 255
#P21=0
#P22=0
#P23=0
#P24=0
# DNS 2. Ignore if DHCP or PPPoE is used
# Number: 0 to 255
#P25=0
#P26=0
#P27=0
#P28=0
# IPv6 Address type. 0 - dynamically assigned via DHCP, 1 - statically Configured. Default is 0.
# Number: 0, 1
# Mandatory
P1419 = 0
# IPv6 Address type: Statically configured. 0 - Full Static, 1 - Prefix Static
# Number: 0, 1
# Mandatory
P1426 = 0
# Full Static: Static IPv6 Address
P1420 =
# Full Static: IPv6 Prefix Length
P1421 =
# Prefix Static: IPv6 Prefix(64bits)
# Max Character Number : 40
P1422 =
# DNS Server 1 for IPv6 Address
# String: a-z, A-Z, 0-9, ".", ":", "[", "]"
P1424 =
# DNS Server 2 for IPv6 Address
# String: a-z, A-Z, 0-9, ".", ":", "[", "]"
P1425 =
# Preferred DNS Server for IPv6 Address
# String: a-z, A-Z, 0-9, ".", ":", "[", "]"
P1423 =
# Virtual Network Interface.
# Network Setting For Management Interface
#
# Enable Management Interface. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P28161 = 0
# Management Access. 0- Management Interface Only, 1 - Both Services and Management Interfaces
# Number： 0， 1
# Mandatory
P28162 = 0
# Enable SNMP Through Management Interface. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
P28209= 0
# Enable TR069 Through Management Interface. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1
# Mandatory
P8607=0
# Enable Syslog Through Management Interface. 0 - No, 1 - Yes. Default is 0.
# Number: 0,1
# Mandatory
P8610=0
# Enable RADIUS Through Management Interface. Default is 0.
# Number: 0,1
# Mandatory
P28793=0
# Voice VLAN Type. 0 - dynamically assigned via DHCP, 1 - statically configured as
# Number: 0, 1
# Mandatory = 0
P22105 = 0
# Static IP Settings
#
# IP Address.
# ipaddress
P22106 = 192.168.100.100
# Subnet Mask.
# ipaddress
P22107 = 255.255.255.0
# Default Router.
# ipaddress
P22108 = 192.168.100.1
# DNS Server 1
# ipaddress
P22109 = 0.0.0.0
# DNS Server 2
# ipaddress
P22110 = 0.0.0.0
# Management Interface IPv4 Address:802.1Q/VLAN Tag
# Number: 0-4094
P22111 = 0
# Management Interface IPv4 Address: 802.1p priority value
# Number: 0-7
P22112 = 0
#################################################################################
#Time Zone. Offset in minutes to GMT
# <value=TZA+12> GMT-12:00 (International Date Line West)
# <value=TZB+11> GMT-11:00 (Midway Island, Samoa)
# <value=HAW10> GMT-10:00 (US Hawaiian Time)
# <value=AKST9AKDT> GMT-09:00 (US Alaska Time)
# <value=PST8PDT> GMT-08:00 (US Pacific Time, Los Angeles)
# <value=PST8PDT,M4.1.0,M10.5.0> GMT-08:00 (Baja California)
# <value=MST7MDT> GMT-07:00 (US Mountain Time, Denver)
# <value=MST7> GMT-07:00 (Mountain Time (Arizona, no DST))
# <value=MST7MDT,M4.1.0,M10.5.0> GMT-07:00 (Chihuahua, La Paz, Mazatlan)
# <value=CST6CDT> GMT-06:00 (Central Time)
# <value=CST+6> GMT-06:00 (Central America)
# <value=CST6CDT,M4.1.0,M10.5.0> GMT-06:00 (Guadalajara, Mexico City, Monterrey)
# <value=EST5EDT> GMT-05:00 (Eastern Time)
# <value=EST5> GMT-05:00 (Eastern Time without daylight saving)
# <value=TZf+4:30> GMT-04:30 (Caracas)
# <value=AST4ADT> GMT-04:00 (Atlantic Time)
# <value=AST4ADT,M4.1.0/00:01:00,M10.5.0/00:01:00> GMT-04:00 (Atlantic Time (New Brunswick))
# <value=NST+3:30NDT+2:30,M4.1.0/00:01:00,M10.5.0/00:01:00> GMT-03:30 (Newfoundland Time)
# <value=TZK+3> GMT-03:00 (Greenland)
# <value=BRST+3BRDT+2,M10.3.0,M2.3.0> GMT-03:00 (Brazil, Sao Paulo)
# <value=UTC+3> GMT-02:00 (Argentina)
# <value=TZL+2> GMT-02:00 (Mid-Atlantic)
# <value=TZM+1> GMT-01:00 (Azores, Cape Verde Is.)
# <value=TZN+0> GMT (Edinburgh, Casablanca, Monrovia)
# <value=GMT+0BST-1,M3.5.0/01:00:00,M10.5.0/02:00:00> GMT (London, Great Britain)
# <value=WET-0WEST-1,M3.5.0/01:00:00,M10.5.0/02:00:00> GMT (Lisbon, Portugal)
# <value=GMT+0IST-1,M3.5.0/01:00:00,M10.5.0/02:00:00> GMT (Dublin, Ireland)
# <value=TZO-1> GMT+01:00 (Paris, Vienna, Warsaw, Brussels)
# <value=CET-1CEST-2,M3.5.0/02:00:00,M10.5.0/03:00:00> GMT+01:00 (Roma, Paris, Madrid, Prague, Berlin, Budapest, Amsterdam, Barcelona)
# <value=TZP-2> GMT+02:00 (Israel, Cairo, Athens, Istanbul, Bucharest)
# <value=EET-2EEST-3,M3.5.0/03:00:00,M10.5.0/04:00:00> GMT+02:00 (Helsinki, Athens, Tallinn)
# <value=EET-2EEST,M3.5.0/3,M10.5.0/4> GMT+02:00 (Kyiv, Ukraine)
# <value=IST-2IDT,M3.5.5/2,M10.5.0/2> GMT+02:00 (Israel DST)
# <value=TZQ-3> GMT+03:00 (Kuwait, Baghdad, Tehran, Nairobi)
# <value=MSK-3MSD,M3.5.0/2,M10.5.0/3> GMT+03:00 (Moscow, Russia)
# <value=MST-3MDT,M3.5.0/2,M10.5.0/3> GMT+03:00 (St.Petersburg, Russia)
# <value=TZR-4> GMT+04:00 (Abu Dhabi, Baku)
# <value=TZS-5> GMT+05:00 (Islamabad, Ekaterinburg, Karachi, Tashkent)
# <value=TZT-5:30> GMT+05:30 (Chennai, New Delhi, Mumbai)
# <value=TZU-5:45> GMT+05:45 (Kathmandu)
# <value=TZV-6> GMT+06:00 (Almaty, Astana, Dhaka, Novosibirsk)
# <value=TZW-6:30> GMT+06:30 (Rangoon)
# <value=TZX-7> GMT+07:00 (Bankok, Hanoi, Krasnoyarsk)
# <value=WIB-7> GMT+07:00 (Jakarta)
# <value=TZY-8> GMT+08:00 (Beijing, Taipei, Kuala Lumpur, Irkutsk)
# <value=SGT-8> GMT+08:00 (Singapore)
# <value=ULAT-8> GMT+08:00 (Ulaanbaatar, Mongolia)
# <value=WST-8> GMT+08:00 (Perth)
# <value=TZZ-9> GMT+09:00 (Japan, Korea, Yakutsk)
# <value=CST-9:30CDT-10:30,M10.5.0/02:00:00,M3.5.0/03:00:00> GMT+09:30 (Adelaide)
# <value=CST-9:30> GMT+09:30 (Darwin)
# <value=TZb-10> GMT+10:00 (Guam)
# <value=EST-10EDT-11,M10.1.0/02:00:00,M3.5.0/03:00:00> GMT+10:00 (Hobart)
# <value=EST-10EDT-11,M10.5.0/02:00:00,M3.5.0/03:00:00> GMT+10:00 (Sydney, Melbourne, Canberra)
# <value=EST-10> GMT+10:00 (Brisbane)
# <value=TZc-11> GMT+11:00 (Magadan, Solomon Is., New Caledonia)
# <value=NZST-12NZDT-13,M10.1.0/02:00:00,M3.3.0/03:00:00> GMT+12:00 (Auckland, Wellington)
# <value=TZd-12> GMT+12:00 (Fiji)
# <value=TZe-13> GMT+13:00 (Nuku'alofa)
# <value=customize> Using self-defined Time Zone
# Mandatory
P64=customize
# Self-Defined Time Zone
# String
P246=MTZ+6MDT+5,M3.2.0,M11.1.0
# Allow DHCP server to set Time Zone. 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P143=1
# Language. 0 - English, 4 - Chinese, 7 - Traditional Chinese, 6 - Russian, 10 - Spanish
# Number: 0, 4, 7, 6, 10
# Mandatory
P342=0
################################
## Static DNS Cache ###
################################
### A Record Settings ###
# A Record: Order Name.
# String: Max length 512 characters.
#P93014=
#P93034=
#P93054=
#P93074=
#P93094=
#P93114=
#P93134=
#P93154=
#P93174=
#P93194=
#P93214=
#P93234=
#P93254=
#P93274=
#P93294=
#P93314=
#P93334=
#P93354=
# A Record: TTL. Default is 300.
# Number:300 to 65535
# Mandatory
#P93015=300
#P93035=300
#P93055=300
#P93075=300
#P93095=300
#P93115=300
#P93135=300
#P93155=300
#P93175=300
#P93195=300
#P93215=300
#P93235=300
#P93255=300
#P93275=300
#P93295=300
#P93315=300
#P93335=300
#P93355=300
# A Record: Address.
# String:
#P93016=
#P93036=
#P93056=
#P93076=
#P93096=
#P93116=
#P93136=
#P93156=
#P93176=
#P93196=
#P93216=
#P93236=
#P93256=
#P93276=
#P93296=
#P93316=
#P93336=
#P93356=
### SRV ###
# SRV: Order Name.
# String: Max length 512 characters.
#P93008=
#P93028=
#P93048=
#P93068=
#P93088=
#P93108=
#P93128=
#P93148=
#P93168=
#P93188=
#P93208=
#P93228=
#P93248=
#P93268=
#P93288=
#P93308=
#P93328=
#P93348=
# SRV: TTL. Default is 300.
# Number:300 to 65535
# Mandatory
#P93009=300
#P93029=300
#P93049=300
#P93069=300
#P93089=300
#P93109=300
#P93129=300
#P93149=300
#P93169=300
#P93189=300
#P93209=300
#P93229=300
#P93249=300
#P93269=300
#P93289=300
#P93309=300
#P93329=300
#P93349=300
# SRV: Priority. Default is 0.
# Number:0 to 65535
# Mandatory
#P93010=0
#P93030=0
#P93050=0
#P93070=0
#P93090=0
#P93110=0
#P93130=0
#P93150=0
#P93170=0
#P93190=0
#P93210=0
#P93230=0
#P93250=0
#P93270=0
#P93290=0
#P93310=0
#P93330=0
#P93350=0
# SRV: Weight. Default is 0.
# Number:0 to 65535
# Mandatory
#P93011=0
#P93031=0
#P93051=0
#P93071=0
#P93091=0
#P93111=0
#P93131=0
#P93151=0
#P93171=0
#P93191=0
#P93211=0
#P93231=0
#P93251=0
#P93271=0
#P93291=0
#P93311=0
#P93331=0
#P93351=0
# SRV: Port. Default is 0.
# Number:0 to 65535
# Mandatory
#P93012=0
#P93032=0
#P93052=0
#P93072=0
#P93092=0
#P93112=0
#P93132=0
#P93152=0
#P93172=0
#P93192=0
#P93212=0
#P93232=0
#P93252=0
#P93272=0
#P93292=0
#P93312=0
#P93332=0
#P93352=0
# SRV: Target.
# String:
#P93013=0
#P93033=0
#P93053=0
#P93073=0
#P93093=0
#P93113=0
#P93133=0
#P93153=0
#P93173=0
#P93193=0
#P93213=0
#P93233=0
#P93253=0
#P93273=0
#P93293=0
#P93313=0
#P93333=0
#P93353=0
### NAPTR ###
# NAPTR: Order Name.
# String: Max length allowed is 512 characters.
#P93000=
#P93020=
#P93040=
#P93060=
#P93080=
#P93100=
#P93120=
#P93140=
#P93160=
#P93180=
#P93200=
#P93220=
#P93240=
#P93260=
#P93280=
#P93300=
#P93320=
#P93340=
# NAPTR: TTL. Default is 300.
# Number:300 to 65535
# Mandatory
#P93001=300
#P93021=300
#P93041=300
#P93061=300
#P93081=300
#P93101=300
#P93121=300
#P93141=300
#P93161=300
#P93181=300
#P93201=300
#P93221=300
#P93241=300
#P93261=300
#P93281=300
#P93301=300
#P93321=300
#P93341=300
# NAPTR: Order. Default is 0.
# Number:0 to 65535
# Mandatory
#P93002=0
#P93022=0
#P93042=0
#P93062=0
#P93082=0
#P93102=0
#P93122=0
#P93142=0
#P93162=0
#P93182=0
#P93202=0
#P93222=0
#P93242=0
#P93262=0
#P93282=0
#P93302=0
#P93322=0
#P93342=0
# NAPTR: Preference. Default is 0.
# Number:0 to 65535
# Mandatory
#P93003=0
#P93023=0
#P93043=0
#P93063=0
#P93083=0
#P93103=0
#P93123=0
#P93143=0
#P93163=0
#P93183=0
#P93203=0
#P93223=0
#P93243=0
#P93263=0
#P93283=0
#P93303=0
#P93323=0
#P93343=0
# NAPTR: Flags.
# String:
#P93004=
#P93024=
#P93044=
#P93064=
#P93084=
#P93104=
#P93124=
#P93144=
#P93164=
#P93184=
#P93204=
#P93224=
#P93244=
#P93264=
#P93284=
#P93304=
#P93324=
#P93344=
# NAPTR: Service. Default is SIP+D2U.
# String:Max length 512 characters.
# Mandatory
#P93005=SIP+D2U
#P93025=SIP+D2U
#P93045=SIP+D2U
#P93065=SIP+D2U
#P93085=SIP+D2U
#P93105=SIP+D2U
#P93125=SIP+D2U
#P93145=SIP+D2U
#P93165=SIP+D2U
#P93185=SIP+D2U
#P93205=SIP+D2U
#P93225=SIP+D2U
#P93245=SIP+D2U
#P93265=SIP+D2U
#P93285=SIP+D2U
#P93305=SIP+D2U
#P93325=SIP+D2U
#P93345=SIP+D2U
# NAPTR: Regexp.
# String
#P93006=
#P93026=
#P93046=
#P93066=
#P93086=
#P93106=
#P93126=
#P93146=
#P93166=
#P93186=
#P93206=
#P93226=
#P93246=
#P93266=
#P93286=
#P93306=
#P93326=
#P93346=
# NAPTR: Replacement.
# String
#P93007=
#P93027=
#P93047=
#P93067=
#P93087=
#P93107=
#P93127=
#P93147=
#P93167=
#P93187=
#P93207=
#P93227=
#P93247=
#P93267=
#P93287=
#P93307=
#P93327=
#P93347=
##############################################################################
## P values not on WEB ##
##############################################################################
# TTL values for keep alive messages
# Number: 1 to 255
#P20517=64(FXS1)
#P20518=64(FXS2, ht802 only)
# ARP interval for network monitor
#P20711=20
# Number of gateway ARP response failures allowed for network monitor
#P20712=1
# Idle Call Setup Action 1. 0 - Continue, 1 - Busy Tone, 2 - Howler Tone, 3 - CPC (disconnect), 4 - Reorder Tone, 5 - Silence, 6 - Stop Sequence.
# Number: 0, 1, 2, 3, 4, 5, 6
# Mandatory
# P28000 = 0 (FXS1)
# P28001 = 0 (FXS2)
# Duration of Idle Call Setup Action 1. Default is 60 seconds.
# Number: 1 - 3600. In seconds.
# Mandatory
# P28004 = 60 (FXS1)
# P28005 = 60 (FXS2)
# Idle Call Setup Action 2. 0 - Continue, 1 - Busy Tone, 2 - Howler Tone, 3 - CPC (disconnect), 4 - Reorder Tone, 5 - Silence, 6 - Stop Sequence.
# Number: 0, 1, 2, 3, 4, 5, 6
# Mandatory
# P28016 = 2 (FXS1)
# P28017 = 2 (FXS2)
# Duration of Idle Call Setup Action 2. Default is 30 seconds.
# Number: 1 - 3600. In seconds.
# Mandatory
# P28020 = 30 (FXS1)
# P28021 = 30 (FXS2)
# Idle Call Setup Action 3. 0 - Continue, 1 - Busy Tone, 2 - Howler Tone, 3 - CPC (disconnect), 4 - Reorder Tone, 5 - Silence, 6 - Stop Sequence.
# Number: 0, 1, 2, 3, 4, 5, 6
# Mandatory
# P28032 = 6 (FXS1)
# P28033 = 6 (FXS2)
# Duration of Idle Call Setup Action 3. Default is 1 seconds.
# Number: 1 - 3600. In seconds.
# Mandatory
# P28036 = 1 (FXS1)
# P28037 = 1 (FXS2)
# Packet Stats
#P28157 =
# Provider Lock Authentication
#P9997=
# Provider Lock Password
#P9998=0
# Provider Lock Enabled. 0 - No, 1- Yes
# Could be provisioned via config file, need to reboot after provision.
# Number: 0, 1
#P9999=0
# DNS Cache Refresh Time. 1 - 1440 minutes, defualt is 30 minutes. Configurable from cfg file only, need to reboot to take effect.
# Number: 1 - 1440
# Mandatory
# P4208 = 30
# DNS Cache Duration. 1 - 1440 minutes, defualt is 0 - Disabled. Configurable from cfg file only, need to reboot to take effect.
# Number: 0 - 1440
# Mandatory
# P28160 = 0
# Web Access Privilege Pattern. 1 - Telefonica Spain, 0 - Default. Defualt is 0. Configurable from cfg file or SSH. If set to 1, User Level can only see the Status page. Under the Status page, CDR/SIP log and GR909 page will not shown.
# Number: 0, 1
# Mandatory
# P28152 = 0
# TR-069 firewall rules.
# Number: 1 to 65535
# Mandatory
# P61701= (FXS1)
# P61702= (FXS2)
# Root CA Version. 0 - Current Root; 1 - New Root. Default is 1.
# Number: 0,1
# Mandatory
# P8603=1
# Provision and upgrade to new Gen-2 certificate. 1- upgrade, 0 - no upgrade. Default is 0.
# Number: 0,1
# Mandatory
# P8604=0
# Contents (text string) of Gen-2 certificate to upgrade.
# String: Maxlength 8192
# P8605=
# Contents (text string) of Gen-2 EC private key to upgrade.
# String: Maxlength 8192
# P8606=
# Disable filename in URL for config provision. 1 -Yes, 0 – No. Default is 0
# Number: 0,1
# Mandatory
# P8615=0
# Disable filename in URL for firmware upgrade. 1 -Yes, 0 – No. Default is 0
# Number: 0,1
# Mandatory
# P8616=0
# AC Ring Trip Threshold. Default is 0.
# 0 - default threshold, 1 - 20mA, 2 - 24mA, 3 - 28mA, 4 - 32mA, 5 - 36mA, 6 - 40mA, 7 - 44mA, 8 - 48mA.
# Number: 0 - 8.
# Mandatory
# P28764=0 (FXS 1)
# P28765=0 (FXS 2)
# Hook Debounce Interval. Default is 0.
# 0 - default threshold, 1 - 2.5ms, 2 - 5ms, 3 - 7.5ms, 4 - 10ms.
# Number: 0 - 4.
# Mandatory
# P28768=0 (FXS 1)
# P28769=0 (FXS 2)
# SRV DNS Cache Name.
# String: Maxlength 512 characters.
# P93028= (FXS1)
# P93048= (FXS2)
# SRV DNS Cache Port. Default is 0.
# Number: 0 - 65535.
# P93032= (FXS1)
# P93052= (FXS2)
# SRV DNS Cache Priority. Default is 0.
# Number: 0 - 65535.
# P93030= (FXS1)
# P93050= (FXS2)
# SRV DNS Cache Target.
# String: Maxlength 512 characters.
# P93033= (FXS1)
# P93053= (FXS2)
#SRV DNS Cache Weight. Default is 0.
# Number: 0 - 65535.
# P93031= (FXS1)
# P93051= (FXS2)
# Initial line polarity. 0 - Forward, 1 – Reverse. The default is 1.
# Number: 0, 1
# Mandatory
#P28834 = 1 (FXS1)
#P28835 = 1 (FXS2)
# Syslog Setting and Internal Logs Protection. 0 - No, 1 - Yes. Default is 0.
# Number: 0, 1
# Mandatory
#P82307 = 0